s p o n s o r e d   l i n k s


1998 Audi A4 Quattro Headlights, Removing And Installing

0

Filed Under (Audi) by admin on 28-08-2010

Tags: , , , ,

download
NOTE: Removing – Remove turn signal. Refer to Turn Signals – Service and Repair – Procedures See: Turn Signals/Service and Repair Protect bumper using cloth backed tape in headlight area to prevent damage to paint. – Remove bolt (arrow) 6 Nm (53 in lb) – - – Remove two bolts (arrows) 6 Nm (53 in lb) Disconnect headlight harness connector. Disconnect headlight beam adjusting motor harness connector. 1998 Audi A4 Quattro Sedan L4-1.8L Turbo (AEB) – Pull headlight out from peg mount at side (approx. 15 mm), lift slightly and then lift out carefully toward front, rotating if necessary. Installing – - – Install in reverse order of removal. Always align headlights to adjacent body panels (gap clearances) before securing. Adjust headlights after assembly. See: Adjustments

Related posts:

  1. 1998 Audi A4 Quattro Front Turn Signals, Removing And Installing
  2. 2004 Audi A6 Headlights, Removing and Installing
  3. 1999 Audi A4 Quattro Sedan Oil Pan (Upper Part) and Oil Pan (Lower Part), Removing and Installing
  4. 2001 Audi A6 Quattro Timing Belt: Service and Repair Toothed Belt, Removing and Installing
  5. 2001 Audi A6 Quattro Water Pump: Service and Repair Coolant pump, removing and installing

Comments are closed.

Related Items: , , , , , , , , , , , , , , , , , , , , , , ,