download
Switch off ignition. Follow instructions for disconnecting and connecting battery. See: Battery/Service and Repair Disconnect and cover battery negative lead. WARNING: Danger of scalding! Only perform these tasks on an engine that has cooled down. Remove alternator drive belt. Remove fan cowl. Drain coolant. Release bolts (1) on alternator. Release nut (1). Disconnect battery positive lead (2) from alternator. Disconnect plug (3). Release screw (4) and remove roller. Release screws (5) on alternator. Recycling A residual quantity of coolant emerges when the alternator is removed from the housing. Catch and dispose of escaping coolant. Observe country-specific waste-disposal regulations.
Related posts:
- 2002 BMW X5 Removing and Installing Intake Air Manifold
- 2001 BMW 330xi (E46) Removing and installing complete water pump (M52 / S52 /M52TU/ M54 / M56)
- 2003 BMW 745i (E65) Removing and installing or replacing airbag unit
- 2005 BMW 745Li Removing and installing or replacing brake linings on both rear disk brakes
- 1997 BMW 328i Removing and installing/ replacing starter motor (M52, manual transmission from 9/95, S52)
