download
Refer to Instructions For Disconnecting And Connecting Battery. Disconnect negative battery lead. E46 Only Disconnect battery positive lead from battery connection point. Remove microfilter. Open cable duct on lower section of microfilter housing (2) and feed out cable(s). Release screws (1) and remove lower section of microfilter housing (2). Remove cover from fuel injectors. Caution: Do not mix up oxygen monitor sensors for cylinders 1 to 3 and 4 to 6 at plug connection to wiring harness. Mark plug connections. Unclip plug connections (1) from holder. Detach retainer (2) from battery positive lead. E46 Only Pull off complete rubber strip (1). Disconnect plug connection (2) on solenoid valve.
Related posts:
- 1997 BMW Z3 Roadster Intake Manifold: Service and Repair
- 2001 BMW X5 Alternator: Service and Repair Removing And Installing/ Replacing Alternator (M62)
- 2002 BMW X5 REPLACING FAN COWL (M62 / M54)
- 1997 BMW 740i Removing and Installing fan for heater and air conditioner (control)
- 2000 BMW Z3 Roadster Radiator: Service and Repair Removing/Installing Radiator
