download
Removal Procedure Caution: Refer to SIR Caution in Service Precautions. 1. Disable the SIR system. 2. Remove the steering wheel from the column. 3. Remove the tilt lever from the lower trim cover. Important: You must check for 2 pan head tapping screws (1,2) in the lower trim cover before removal. 4. If necessary, remove the 2 pan head tapping screws (1,2) from the lower trim cover (3). Remove the lower trim cover (3). If screws are not present in the lower trim cover, proceed to the next step. 5. Gently unsnap the lower trim cover from the upper trim cover. Important: You must check for 2 pan head tapping screws (1,2) in the lower trim cover (3) before removal. 2004 Buick LeSabre V6-3.8L VIN K 6. If necessary, remove 1 TORX head screw (1) from the upper trim cover (2). If a screw is not present, remove the upper trim cover (2). Installation Procedure Notice: Refer to Fastener Notice in Service Precautions. Important: If the snap on/off feature on the trim covers was damaged during the removal procedure, you must use screws for the installation procedure. If screws were present in the trim covers before the removal procedure, you must use the screws during the installation procedure. If there was not any damage done to the trim covers during the removal procedure and no screws were present, proceed to step 3.
Related posts:
- 2004 Buick LeSabre Multifunction, Turn Signal Switch Replacement
- 2002 Buick Rendezvous Trim Panel Replacement Side Front Door
- 1994 Buick LeSabre FRONT DOOR TRIM PANEL – REMOVAL/ DISASSEMBLY
- 2000-2001 Buick LeSabre Steering Vibration/ SHudder During Parking Manuever
- 1997 Buick Century Instrument Panel Accessory Trim Plate Replacement
