Filed Under (Opel) by admin on 25-05-2010
download
Some control modules don’t have a serial link. To read the fault code, you will have a to use a different method. Bridge pin A and B in the diagnostic connector Turn the ignition on Count flashes in the check engine lamp Translate them using the list below To erase the fault code disconnect the battery for 30 seconds Blink code interpretation The code read out always starts with “Code 12” repeated three times, the fault codes are flashed. All codes are repeated three times, the first digit is flashed with a space of 0.4 seconds, then there is a 1.2 second delay until the second digit is flashed. The delay between codes is 3.2 seconds. The sequence is ended by once again flashing of “Code 12” three times.
Filed Under (Opel) by admin on 02-04-2010
download
Features:
1. Connects via USB to PC
2. Immo1 & Immo2 supported up to year 2004
3. Read Login code
4. Programm new keys
5. Read and erase error codes of IMMO
Remarks:
Reading of PIN for immo1 works only if pin code already have been entered sometimes before
Reading of PIN code for immo2 is not possible by OBD
Filed Under (Buick, Opel) by admin on 23-09-2009
chassis service manual for a 1978 Buick Opel. Copyright 1978 by General Motors Corporation. The manual includes procedures for diagnosis, maintenance, adjustments and service operations of components and systems.General Information Heating and Air Conditioning Body and Bumpers Suspension, Steering, Wheels, and Tires
Propeller Shaft and Rear Axle Brakes Engine Transmission Chassis and Body Electrical Accessories Metrics
