s p o n s o r e d   l i n k s


1994 Chevrolet S10 Pickup FRONT TIMING CASE COVER & FRONT SEAL Installation

0

Filed Under (Chevrolet) by admin on 05-05-2010

Tags: , , , , , , , , ,

download
1. Lubricate seal lips with engine oil. Using Seal Installer (J-35468), install front cover oil seal into front cover and leave installer in position. Apply a 3/8″ wide by 5/16 thick bead of RTV sealer to oil pan sealing surface and front cover sealing surface. Apply RTV sealant to crankshaft pulley hub keyway. 2. Install crankcase cover with seal installer in place to front of engine. Install and tighten front cover bolts to specification. See TORQUE SPECIFICATIONS. Position crankshaft pulley hub onto crankshaft.
3. Install crankshaft pulley hub using Hub Installer (J-29113), ensuring at least .24″ (6.1 mm) of installer bolt thread is engaged into end of crankshaft. 4. To complete installation, reverse removal procedure. Tighten nuts and bolts to specification. See Fig. 6 .
See TORQUE SPECIFICATIONS.

Related posts:

  1. 1999 Chevrolet Chevy Suburban Transfer Case Internal Components Assemble
  2. 1998 Chevrolet Pickup K3500 TRANSFER CASE DISASSEMBLY
  3. 1985 Chevrolet Pickup C10 UPPER CONTROL ARM & BUSHINGS Removal
  4. 1994 Chevrolet S10 Pickup FUEL SYSTEM PRESSURE TEST
  5. 1992 Chevrolet Lumina Timing Belt: Service and Repair Installation

Comments are closed.

Related Items: , , , , , , , , , , , , , , , , , , , , , , ,