s p o n s o r e d   l i n k s


1998 Chevrolet Camaro Headlamp Switch REMOVAL PROCEDURE

0

Filed Under (Chevrolet) by admin on 28-08-2010

Tags: , , ,

download
REMOVAL PROCEDURE 1. Remove the left hand instrument panel accessory trim plate (3). 2. Remove the headlamp switch bolts (2) 3. Disconnect the headlamp switch connector (1) from the headlamp switch (4). 4. Disconnect the dimmer switch connector (5) from the headlamp switch (4). INSTALLATION PROCEDURE 1. Connect the dimmer switch connector (5) to the headlamp switch (4). 2. Connect the headlamp switch connector (1) to the headlamp switch (4). NOTE: Refer to Fastener Notice in Cautions and Notices. 3. Install the headlamp switch bolts (2). Tighten Tighten the headlamp switch bolts (2) to 1.9 N.m (17 lb in). 4. Install the left hand instrument panel accessory trim plate (3).

Related posts:

  1. 2003 Chevrolet Impala LS MULTIFUNCTION, TURN SIGNAL SWITCH REPLACEMENT Removal Procedure
  2. 2007 Chevrolet Malibu Headlamp Assembly or Headlamp Bulb and/or Cornering, Sidemarker, Park, Turn Signal Bulb Replacement
  3. 2006 Chevy Equinox Trim Panel Replacement – Rear Quarter Lower Removal Procedure
  4. 1999-2002 Chevrolet Malibu Turn Signal/ Hazard Warning Flashers inoperative
  5. 2001 Chevrolet Malibu Trim Panel Replacement – Side Front Door

Comments are closed.

Related Items: , , , , , , , , , , , , , , , , , , , , , , ,