s p o n s o r e d   l i n k s


1998 Chevy Venture Starter Motor Replacement

0

Filed Under (Chevrolet) by admin on 16-05-2010

Tags: , ,

download
REMOVAL PROCEDURE
IMPORTANT: This vehicle uses the PG260 F1 starter motor. The starter motor is serviced only as a complete unit. Zoom Sized for Print
1. Disconnect the battery ground (negative) cable from the battery. 2. Raise the vehicle and suitably support. Refer to Lifting and Jacking the Vehicle in General Information. 3. Remove the electrical connections at the starter motor. 4. Remove the torque converter cover. 5. Remove the starter motor bolts. 6. Remove the starter motor from the engine.
INSTALLATION PROCEDURE

Related posts:

  1. 2004 Chevrolet Silverado 2500 HD CRANKSHAFT BALANCER REPLACEMENT
  2. 1998 Chevy Venture Intake Manifold: Service and Repair Replacement (Lower)
  3. 2004 Chevrolet Silverado 1500 WHEEL HUB, BEARING, AND SEAL REPLACEMENT (4WD)
  4. 1998 Chevy Venture Intake Manifold: Service and Repair Replacement (Upper)
  5. 2004 Chevy Colorado 2WD BLOWER MOTOR RESISTOR ASSEMBLY REPLACEMENT

Comments are closed.

Related Items: , , , , , , , , , , , , , , , , , , , , , , ,