download
LINE-A/C LIQUID WARNING: REFER TO THE APPLICABLE WARNINGS AND CAUTIONS FOR THIS SYSTEM BEFORE PERFORMING THE FOLLOWING OPERATION. FAILURE TO FOLLOW THE WARNINGS AND CAUTIONS COULD RESULT IN POSSIBLE PERSONAL INJURY OR DEATH. NOTE: The A/C liquid line is serviced in two sections. The rear section of the liquid line is serviced as an assembly with the rear section of the A/C suction line. FRONT SECTION REMOVAL 1. Recover the refrigerant from the refrigerant system. 2. Disconnect and isolate the negative battery cable. 3. Remove the air cleaner housing. 4. Raise and support the vehicle. 5. Remove the front end splash shields. 6. Remove the nut (3) that secures the front section of the A/C liquid line (4) to the A/C condenser (5). 7. Disconnect the A/C liquid line from the A/C condenser and remove and discard the dual plane seal. 8. Install plugs in, or tape over the opened liquid line fitting and condenser outlet port. NOTE: LHD model shown. RHD model similar.
Related posts:
