download
The manufacturer recommends replacing the belt at 72,000 miles, except in California. In California, inspect the belt at 60,000 miles and replace the belt at 102,000 miles. REMOVAL & INSTALLATION CAUTION: This application is an interference engine. Do not rotate camshaft or crankshaft when timing belt is removed, or engine damage may occur. TIMING BELT Removal 1. Disconnect negative battery cable. Disconnect intake air temperature sensor connector from intake air duct. Disconnect the air intake tube from the throttle body. Disconnect the breather tube from the valve cover. Remove the air filter housing. 2. Raise and support the vehicle. Remove right front wheel. Remove right front splash shield from wheelwell. Remove serpentine accessory drive belt. 3. Remove crankshaft pulley bolts. It is NOT necessary to remove crankshaft sprocket center bolt. Remove crankshaft pulley. Lower vehicle.
Related posts:
- 1999 Daewoo Nubira SX TIMING BELT REMOVAL & INSTALLATION
- 2001 Daewoo Leganza SE TIMING BELT REMOVAL & INSTALLATION
- 2002 Daewoo Lanos S TIMING BELT REMOVAL & INSTALLATION
- 1999 Daewoo Lanos SE TIMING BELT Removal
- 2002 Daewoo Leganza SE Dashboard / Instrument Panel: Service and Repair Removal Procedure
