download
The heater-A/C housing assembly must be removed from the vehicle and disassembled for service access of the blower motor, blower motor wheel, heater core, evaporator coil, blend-air door, and each of the various mode control doors. WARNING: ON VEHICLES EQUIPPED WITH AIR-BAGS, FAILURE TO TAKE THE PROPER PRECAUTIONS COULD RESULT IN ACCIDENTAL AIR-BAG DEPLOYMENT AND POSSIBLE PERSONAL INJURY. REMOVAL 1. Disconnect and isolate the battery negative cable. 2. Remove the instrument panel from the vehicle. Refer to: Body and Frame, Interior Trim, Dashboard/Instrument Panel, Service and Repair, Instrument Panel Assembly Replacement, See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Instrument Panel Assembly Replacement 3. Recover the refrigerant from the refrigerant system. Refer to: Heating and Air Conditioning, Service and Repair, Refrigerant Recovery, See: Service and Repair/Refrigerant Recovery 4. Remove the front expansion valve from the evaporator tube mounting flange. Install plugs in, or tape over all of the opened refrigerant line fittings. Refer to: Heating and Air Conditioning, Expansion valve, Service and Repair, Expansion Valve Removal and Installation, See: Expansion Valve/Service and Repair 5. Drain the engine cooling system. 6. Disconnect the heater hoses from the heater core tubes.
Related posts:
- 1998 Dodge Dakota R/T Heater – A/C Housing Removal and Installation
- 1999 Dodge Durango Heater Core: Service and Repair
- 1999 Dodge Durango Dashboard / Instrument Panel: Service and Repair Instrument Panel Assembly Replacement
- 1998 Dodge Durango Air Bag Service and Repair REMOVAL
- 2000 Dodge Durango Power Windows – Dakota & Durango TROUBLE SHOOTING
