Filed Under (Dodge) by admin on 26-08-2010

4. Align crankshaft sprocket timing mark to the mark on oil pump housing (Fig. 122). NOTE: Lubricate timing chain and guides with engine oil before installation. 5. Place left side primary chain sprocket onto the chain so that the timing mark is located in-between the two (plated) timing links (Fig. 122). 6. Lower the primary chain with left side sprocket through the left cylinder head opening. NOTE: The camshaft sprockets can be allowed to float on the camshaft hub during installation 1 – CAMSHAFT TIMING MARKS 2 ? CHAIN GUIDE 3 – CRANKSHAFT TIMING MARKS 4 – CRANKSHAFT SPROCKET 5 – CHAIN TENSKJNER ARM 6 – CHAIN TENSIONER 7 – CAMSHAFT TIMING MARK 8 – INTAKE CAMSHAFT SPROCKETS 9 – CHAIN GUIDES 10 – WATER PUMP SPROCKET 7. Loosely position left side camshaft sprocket over camshaft hub. 8. Align timing (plated) link tq the crankshaft sprocket timing mark (Fig. 122). 9. Position primary chain onto water pump drive sprocket. 10. Align right camshaft sprocket timing mark to the timing (plated) link on the timing chain (Fig. 122) and loosely position over camshaft hub. 11. Verify that all chain timing (plated) links are properly aligned to the timing marks on all sprockets (Fig. 122). 12. Install left side lower chain guide and tensioner arm (Fig. 120). Tighten attaching bolts to 28 Nm (250 in. lbs.). NOTE: Inspect oil ring on chain guide access plug before installing. Replace O-ring as necessary. 13. Install chain guide access plug to left side cylinder head (Fig. 120). Tighten plug to 20 Nm (15 ft lbs.)

  2001 Dodge Intrepid TIMING CHAIN ALIGNMENT Direct Download speed 4887 Kb/s

  2001 Dodge Intrepid TIMING CHAIN ALIGNMENT Full Version speed 5767 Kb/s

Comments are closed.