download
REMOVAL SERVICE PRECAUTIONS The tilt and standard column have been designed to be serviced as an assembly; without wiring, switches, shrouds, steering wheel, etc. Most steering column components can be serviced without removing the steering column from the vehicle. Safety goggles should be worn at all times when working on steering columns. To service the steering wheel, switches or airbag, Refer to Restraint Systems and follow all WARNINGS and CAUTIONS. CAUTION: Do not hammer on steering column shaft. This may cause damage to the shaft or bearing. CAUTION: Do not attempt to remove the pivot bolts to disassemble the tilting mechanism. The ignition key must be in the key cylinder for cylinder removal. The key cylinder must be removed first before removing ignition switch. 1. Remove the negative (ground) cable from the battery. 2. Disable the airbag. 3. Remove the lower and upper shrouds. 4. Remove key cylinder. 5. Disconnect the lower clock spring connectors. 6. Remove the wire retainer from the tilt lever bracket.
Related posts:
- 1993 Dodge Dakota Ignition Switch: Service and Repair REMOVAL
- 2002 Dodge RAM 1500 Steering Column REMOVAL
- 2004 Dodge Grand Caravan Steering Gear: Service and Repair With LHD Gear REMOVAL
- 1999 Dodge Durango Dashboard / Instrument Panel: Service and Repair Instrument Panel Assembly Replacement
- 1998 Dodge Durango Air Bag Service and Repair REMOVAL
