download
Air suspension switch in trunk area must be turned o . On 1991-94 vehicles, locate the control module for the air suspension in the trunk area on either the back of rear seat or behind the trim panel on the right rear side of the trunk. On 1995-97 vehicles the control module is located under the right side of dash panel. There are 2 connectors for all model years, 1 black and 1 gray. On the 98-06 leave the solenoid connected. Disconnect the black connector and remove or cut the wire to pin #11 as shown. This will turn o the “AIR SUSP” message on the dashboard. The color code for this wire should be as follows: LINCOLN TOWN CAR: dark green/light green CROWN VICTORIA: green MERCURY GRAND MARQUIS: green Reconnect the black connector to the control module. This connector must be reconnected as the control module also controls functions of the “EVO” steering system. Turn Suspension Switch ON. NOTE: The parts in this kit are designed to replace the worn or nonfunctioning original equipment parts in the vehicle as produced by the car factory. These parts are not designed for installation on vehicles where the suspension aand/or steering systems have been modified for racing, competition, or any other reason than originally designed by manufacturer.
Related posts:
- Ford Crown Victoria, Mercury Grand Marquis Repair Manual 1988-2000
- Ford Crown Victoria, Mercury Grand Marquis Repair & Service Manual 1989-1998
- 2003 Crown Victoria/ Grand Marquis/ Marauder Workshop Manual Instrument Panel Removal
- 1997 Ford Crown Victoria Steering Column Removal
- 2001 Ford Crown Victoria Shock Absorber REMOVAL AND INSTALLATION
