download
All vehicles 1. Raise the vehicle on a hoist. 2. If the vehicle is equipped with an inline transmission fluid filter, remove and discard the filter. Vehicles Equipped With A Fluid Pan Drain Plug 3. Remove the drain plug and allow the fluid to drain. 4. NOTE: Do not discard the gasket unless damaged. This is a reusable gasket. Remove the transmission fluid pan and the gasket. Vehicles Not Equipped With A Fluid Pan Drain Plug 2001 Ford Truck Expedition 4WD V8-5.4L SOHC VIN L 5. NOTE: Do not discard the fluid pan gasket unless damaged. This is a reusable gasket. Remove the transmission fluid pan and gasket. 1 Loosen, but do not remove the bolts. 2 Remove the front and side bolts. 3 Lower the front of the fluid pan and allow the fluid to drain. 4 Remove the remaining fluid pan bolts and the fluid pan. All vehicles 6. CAUTION: When installing a new transmission fluid filter and seal assembly, the torque converter should be drained. Transmission cooler, cooler lines, and cooler bypass valve must be thoroughly flushed to remove any contamination. NOTE: After removal, discard the filter and seal assembly. Remove the filter and seal assembly by carefully pulling and rotating the filter as necessary. 7. CAUTION: Be careful not to scratch or damage the aluminum bore. The new seal may leak and damage to the case will result. If the seal remains in the pump bore, remove it carefully with a small screwdriver so as not to scratch or damage the aluminum bore.
Related posts:
- 2006 Ford Freestyle Transmission Fluid Drain and Refill GENERAL PROCEDURES
- 2002 Ford escape Fluid – A/T: Service and Repair Transmission Fluid Drain And Refill
- 2003 Ford Explorer Automatic Transmission/Transaxle: Service and Repair Transmission Fluid Drain and Refill
- 2006 Ford Explorer Transmission Fluid Refill procedure
- 2008 Ford Escape CD4E TRANSMISSION FLUID LEAK TRANSMISSION FLUID COOLER (EXCLUDES HYBRIDS)
