2003 Crown Victoria/ Grand Marquis/ Marauder Workshop Manual Instrument Panel Removal

0

Filed Under (Ford) by admin on 26-06-2010

download
1. Depower the Supplemental Restraint System (SRS). For additional information, refer to Supplemental Restraint System (SRS) Depowering and Repowering in Section 501-20B. 2. If equipped, remove the floor console. For additional information, refer to Floor Console in this section. 3. Position the speed control actuator aside. 1. Remove the nuts. 2. Disconnect the electrical connector. 4. Loosen the bolt and disconnect the LH bulkhead electrical connector. 5. Release the retainers and position the bulkhead electrical connector through the dash panel. 6. Disconnect the A/C temperature sensor electrical connector. 7. Disconnect the RH engine compartment in-line wiring harness connectors. 8. Remove the RH fender splash shield. For additional information, refer to Section 501-02. 9. Remove the RH instrument panel lower insulator. Remove the pin-type retainers.

Comments are closed.