s p o n s o r e d   l i n k s


2004 Ford Ranger Transmission Position Switch/ Sensor: Service and Repair

0

Filed Under (Ford) by admin on 09-09-2010

Tags: , , , , , ,

download
Special Tool(s) Removal 1. With the vehicle in NEUTRAL, position it on a hoist. 2. Disconnect the shift cable from the manual control lever. 3. Disconnect the digital transmission range (TR) sensor electrical connector. 4. Remove the manual control outer lever nut and manual control outer lever. 2004 Ford Truck Ranger 2WD V6-4.0L VIN E 5. Remove the screws and the digital TR sensor. Installation 1. Install the digital TR sensor and loosely install the screws. 2. CAUTION: Tightening one screw before tightening the other may cause the sensor to bind or become damaged. NOTE: The manual lever must be in the NEUTRAL position. Using the special tool, align the digital TR sensor and tighten screws in an alternating sequence. 3. Install the manual control outer lever and nut.

Related posts:

  1. 1991 Ford Thunderbird Crankshaft Position Sensor Service and Repair
  2. 1996 Ford Aerostar/Ranger/Explorer Camshaft Position (CMP) Sensor REMOVAL AND INSTALLATION
  3. 1998 Ford Windstar Camshaft Position (CMP) Sensor REMOVAL AND INSTALLATION
  4. 1995 Ford Mustang Camshaft Position (CMP) Sensor Removal Installation
  5. 2000 Ford Ranger Main Control Valve Body Removal

Comments are closed.

Related Items: , , , , , , , , , , , , , , , , , , , , , , ,