s p o n s o r e d   l i n k s


2007 Ford Expedition Battery Removal and Installation

0

Filed Under (Ford) by admin on 12-07-2010

Tags: , , , , ,

download
1. Disconnect the battery cables. 2. Loosen and remove the battery hold-down bolt and clamp. To install, tighten to 9 Nm (80 lb-in) . 3. WARNING: When lifting a battery, excessive pressure on the end walls could cause acid to leak out through the vent caps, resulting in personal injury, or damage to the vehicle or battery. Lift with a battery carrier. Failure to follow these instructions may result in personal injury. Remove the battery and the heat shield. 4. To install, reverse the removal procedure.

Related posts:

  1. 2008 Ford Expedition Brake Pads REMOVAL AND INSTALLATION
  2. 2005 Ford F 150 STARTER MOTOR Removal and Installation
  3. FORD RANGER, MAZDA PICKUP 3” BODY LIFT INSTALLATION INSTRUCTIONS
  4. 1999 Ford Expedition Suspension Ride Height Adjustments GENERAL PROCEDURES
  5. 2004 Ford F-150 Evaporative Emission Canister and Purge Valve 5.4L REMOVAL AND INSTALLATION

Comments are closed.

Related Items: , , , , , , , , , , , , , , , , , , , , , , ,