s p o n s o r e d   l i n k s


1998 GMC S15/ T15 Jimmy Power Steering Pump: Service and Repair

0

Filed Under (GM) by admin on 27-08-2010

Tags: , , , , , , ,

download
On-Vehicle Service REMOVE OR DISCONNECT ^ Tools Required: – J 25034-B Pulley Remover Place a drain pan below the pump. 1. Hoses. Cap the hoses. 2. Unload the tensioner assembly. Refer to Engine. 3. Belt. 4. Pulley. – Install J 25034-B. Be sure the pilot bolt bottoms in the pump shaft by turning the nut to the top of the pilot bolt. Hold the pilot bolt. Turn the nut counterclockwise. 5. Filler neck tube. 6. Rear brace nut from engine stud. Front mounting bolts. 8. Power steering pump. INSTALL OR CONNECT Tools Required: – J 25033-B Pulley Installer 1. Power steering pump. 2. Front mounting bolts. Tighten – Bolts to 50 Nm (39 ft. lbs.). 3. Rear brace. 4. Nut and bolt. Tighten – Nut to 41 Nm (31 ft. lbs.). 5. Filler neck tube. Tighten – Filler neck tube bolt to 20 Nm (15 ft. lbs.). 6. Pulley.

Related posts:

  1. 2000 GMC Jimmy INTAKE MANIFOLD REPLACEMENT – UPPER Removal Procedure
  2. 2003 GMC Sierra Denali Differential Assembly: Service and Repair 8.25 S4WD and 9.25 Axles
  3. 2002 GMC Savana Steering Wheel Replacement
  4. 2000 GMC Truck K 2500 Oil Line, Engine Service and Repair
  5. 2005 GMC Truck Sierra Steering – Underhood Clunk Heard/ Felt in Steering Wheel

Comments are closed.

Related Items: , , , , , , , , , , , , , , , , , , , , , , ,