download
Important : The upper intake does not have to be removed to remove the lower intake manifold. 1. Disconnect the breather tube at the air cleaner outlet duct. Fig. 65: Breather Tube 2. Remove the air cleaner outlet duct retaining wingnut. Fig. 66: Air Cleaner Outlet Duct Retaining Wingnut 3. Disconnect the IAT sensor harness connector. 4. Remove the air cleaner outlet duct from the throttle body. 7. Disconnect the cruise control cable, if equipped from the throttle shaft and the accelerator cable bracket. 8. Disconnect the vacuum hose from the intake manifold for the vacuum tank. 9. Remove the power brake booster vacuum hose. 2000-01 ENGINE Engine Mechanical – 4.3L – Blazer, Bravada, Sonoma & S10 Pickup
Related posts:
- 2002 GMC K 3500 Boost Sensor Replacement (Federal Emissions) REMOVAL PROCEDURE
- 1986 GMC Vandura Special G3500 BRAKES Disc & Drum
- 2009 Holden VE Sedan Front Side Door Trim Panel Replacement Removal Procedure
- 1998 GMC S15/ T15 Jimmy Power Steering Pump: Service and Repair
- 2000 GMC K Sierra Engine Cranks But Does Not Run Diagnostic Information and Procedures
