download
Trim Removal/Installation – Seat Side and Rear Shelf Area Special Tools Required KTC trim tool set SOJATP2014 2-door NOTE: Put on gloves to protect your hands. Use the appropriate tool from the KTC trim tool set to avoid damage when prying components. Take care not to bend or scratch the trim and panels. 1. Remove the trim as shown. To remove the side trim panel, remove the rear seat-back and rear seat cushion. 2. Install the parts in the reverse order of removal, and note these items: Before installing the rear shelf, remove the clips from the body, and install them to the rear shelf. Replace any damaged clips. When installing the rear shelf, slip the rear seat belts and center belt through the slits in the rear shelf. Make sure the high mount brake light connector is plugged in properly. Apply liquid thread lock to the anchor bolts before installation.
Related posts:
