Auto Repair Manual Free Download and ReviewsFree download ebook pdf files automotive manual

download
NOTE: Both pulse generator-B inspection and TCM reprogramming procedures should be performed. PULSE GENERATOR-B INSPECTION PROCEDURE: 1. Open and secure the hood. 2. Remove the resonator. 3. Locate the pulse generator under the battery tray. Disconnect the pulse generator connector (blue) and remove the pulse generator male connector (black) from the bracket. 2001 Hyundai Accent GS Sedan L4-1.6L 4. Using an ohmmeter, check the resistance between terminal No. 3 and No. 4 in the disconnected pulse generator male connector (black color). Resistance value: 215-275W (at 20°C or 68°F) If the resistance is lower or higher than the specification, replace the pulse generator (P/N 45955-22700). If the resistance is within specification go to Step 5. 5. Clean both ends of the disconnected pulse generator connectors with aerosol electrical contact cleaner. 6. Apply contact grease (P/N 00305-F0000-39, NYOGEL 760G), into all four terminal openings of the blue female connector until each terminal opening is completely filled with grease. 7. Reconnect the pulse generator connectors and reattach the connector to the bracket. Reinstall all removed components in the reverse order of removal. TCM SPECIFICATIONS CAUTIONS BEFORE REPROGRAMMING:

Related posts:

1. 2001 Hyundai Sonata ENGINE PERFORMANCE On-Vehicle Adjustments
2. 2006 Hyundai Sonata ESC ECU REPROGRAMMING INSTRUCTIONS
3. 2001 Hyundai Accent GL FUEL PUMP TEST
4. 2004 Hyundai Accent Headlamp REMOVAL AND INSTALLATION
5. 2002 Hyundai Accent 1.6L, Vin C 2003 Hyundai Accent GS 1.5L Difficulty filling the gas tank The pump keeps clicking off