Filed Under (Hyundai) by admin on 12-03-2011
You will also see how to change window glass and electric window motor in this series. First, unscrew the 7 screws holding on the door panel. Next you carefully pry off the tweeter cover that is where the mirror is. Lift the panel up and off of the door. Undo all of the wiring connections except for the window controller. Open the 2 black rubber view ports (Circled in Yellow) and roll the window up or down until you see the 10mm bolts that hold the window in place. Loosen, but don’t remove these bolts. Slide the window up, and tape it up, or remove the window and set aside. Next, unplug the door lock plug and move the door panel out of the way. Unscrew the gold 10mm bolts that hold on the metal inner door panel (circled in green in pic5). Also remove the Phillips screw that holds the inner door handle on (circled in red on pic 5) Unscrew the small bolt that holds on the lock cylinder that is behind the quarter-sized black cap on the side of the door. Be careful with that little bolt or it will fall into never never land .