Filed Under (land rover) by admin on 04-06-2010
SITUATION: INSPECTION AND RE-USE OF VIS MOTOR GASKETS Previously Land Rover had not supplied the Variable Induction System (VIS) motor gaskets as spare parts. Technical Alert TA023001 had instructed Retailers to retain the seals for reuse. RESOLUTION: VIS MOTOR GASKETS NOW AVAILABLE AS SPARES The VIS motor gaskets and screws may be reused after careful inspection for damage. (Refer to Alert TA02 3001) The gaskets and screws have now been made available as spare parts in the event of damage or loss. 2. If a VIS motor is removed for any reason, inspect the seal for damage. (Figure 1) 3. If no damage is evident, clean and install the used seal to the VIS motor. 4. If the seal is damaged, install a new seal.