download
Installation Note: Regulator handle Install the regulator handle as shown. Note: With door glass at fully-closed position. Adjustment Door glass Adjustment of the door glass (convertible top and detachable hard top) is made as follows: 1. Vertical adjustment of door glass Adjustment procedure Remove the weatherstrip, and check alignment with the door glass in the fully-closed position. (1) Loosen upper stop installation bolts (A). (2) Adjust by moving the upper stop up or down so that the upper edge of the door glass is in the correct position, and then tighten bolts (A). Note: When the door glass is raised, both glass stop must contact the upper stop simultaneously. Before an upper stop is moved for adjustment, lower the door glass slightly.
Related posts:
