1998 Mazda 626 LX Air Flow Meter/ Sensor Using the NGS Tester

0

Filed Under (Mazda) by admin on 19-11-2010

download
1. Check the mass air flow sensor for damage and cracks. 2. Connect the New Generation Star tester to the data link connector. 3. Turn the ignition switch to ON. 4. Select the “PID/DATA MONITOR AND RECORD” function on the NGS tester display and press TRIGGER. 5. Select “MAF V” on the NGS tester display and press START. The NGS tester measures and show the voltage. 6. If not as specified, inspect the following. (1) Harness continuity Between PCM terminal 88 and mass air flow sensor terminal E Between PCM terminal 36 and mass air flow sensor terminal D Between PCM terminal 103 and mass air flow sensor terminal C Between main relay terminal E and mass air flow sensor terminal B (2) Terminal voltage Mass air flow sensor terminal B voltage: Battery positive voltage Mass air flow sensor terminal C voltage: Below 1.0 V 7. If the terminal voltage is correct and there is harness continuity, replace the mass air flow sensor.

Related entry:

where is the mass air flow sensor on a 2006 chrysler pacifica, 1998 ford escort emissions schematic, 1999 ford escort emissions diagram, 2002 camaro black positive terminal wire, 2010 chrysle diagnostic flow chart p2167, 98 3000gt obd2 fuse, maf 1998 infiniti q45 location, vt 365 antifreeze,

  1998 Mazda 626 LX Air Flow Meter/ Sensor Using the NGS Tester Direct Download speed 4887 Kb/s

  1998 Mazda 626 LX Air Flow Meter/ Sensor Using the NGS Tester Full Version speed 5767 Kb/s

Comments are closed.