download
GENERATOR INSPECTION Generator Warning Light 1. Verify that the battery is fully charged. 2. Verify that the drive belt deflection/tension is correct. 3. Turn the ignition switch to ON and verify that the generator warning light comes on. 4. If not, inspect the generator warning light, wiring harnesses between the battery, generator warning light, and PCM terminal 1 ohm . When the generator warning light and the wiring harnesses are okay, replace the PCM. 5. Verify that the generator warning light goes out after the engine is started. 6. If not, verify the diagnostic trouble code No.8 displayed. Generator Voltage 1. Verify that the battery is fully charged. 2. Verify that the drive belt deflection/tension is within the specification. 3. Turn off all electrical loads. 4. Turn the ignition switch to START and verify that the generator turns smoothly without any noise while the engine is running.
Related posts:
