s p o n s o r e d   l i n k s


2006 Mazda 3 i WHEEL HUB, STEERING KNUCKLE REMOVAL/ INSTALLATION

0

Filed Under (Mazda) by admin on 23-06-2010

Tags: , , , , , , , , , , , ,

download
1. Remove in the order indicated in the table. 2. Install in the reverse order of removal. 3. After installation, inspect the front wheel alignment and adjust it if necessary. (See FRONT WHEEL ALIGNMENT ). Fig. 3: Wheel Hub/Steering Knuckle Components & Torque Specification LOCKNUT REMOVAL NOTE 1. Knock the crimped portion of the locknut outward using a small chisel and a hummer. 2. Lock the hub by applying the brakes. 3. Remove the locknut. Fig. 4: Knocking Crimped Portion Of Locknut Outward Using Small Chisel And Hummer BRAKE CALIPER REMOVAL NOTE 1. Remove the brake caliper component from the steering knuckle and suspend it out of the way using a cable. Fig. 5: Removing Brake Caliper WHEEL HUB, STEERING KNUCKLE COMPONENT REMOVAL NOTE 1. Separate the shock absorber from the wheel hub, steering knuckle component by tapping the upper part of the steering knuckle with a hammer.

Related posts:

  1. 2006 Mazda 3 i WHEEL HUB, STEERING KNUCKLE REMOVAL/INSTALLATION
  2. 2006 Mazda 3 i WHEEL HUB, STEERING KNUCKLE REMOVAL/ INSTALLATION
  3. 2004 Mazda Truck Tribute BRAKE CALIPER ANCHOR PLATE Removal and Installation
  4. 1995 Mazda MX-6 FRONT DISC BRAKE CALIPER FRONT BRAKE ROTOR Removal & Installation
  5. 2003 Mazda 6 FRONT BUMPER REMOVAL/INSTALLATION

Comments are closed.

Related Items: , , , , , , , , , , , , , , , , , , , , , , ,