s p o n s o r e d   l i n k s


2008 Mercury Mariner Rear Bumper Cover / Fascia Removal and Replacement

0

Filed Under (Mercury) by admin on 29-07-2010

Tags: , , , , , ,

download
BUMPER COVER – REAR Exploded View Removal and Installation 1. Remove the 2 rear bumper cover lower screws (1 each side). To install, tighten to 5 Nm (44 lb-in) . 2. Remove the 4 rear bumper cover center screws. 3. Remove the 2 rear bumper cover lower pushpins. 4. Remove the 2 rear splash shield-to-rear bumper cover screws (1 each side). 5. Remove the 2 rear bumper cover upper screws (1 each side). To install, tighten to 5 Nm (44 lb-in) . 6. Remove the 2 liftgate alignment bumper bolts and the 2 liftgate alignment bumpers. To install, tighten to 8 Nm (71 lb-in) . 7. Disconnect the parking aid system or trailer tow electrical connector, if equipped. 8. Remove the rear bumper cover. 9. To install, reverse the removal procedure. When installing, position the rear bumper cover into the bumper slides.

Related posts:

  1. 1994 Mercury Villager Trim Panel Liftgate Door Lower Removal Installation
  2. 2000 Mercury Cougar Lower Intake Manifold Removal Installation
  3. 1999 Mercury Cougar Rear Strut and Spring Assembly REMOVAL AND INSTALLATION
  4. 1994 Mercury Villager Water Pump REMOVAL AND INSTALLATION
  5. 1995 Mercury Villager Water Pump Removal Installation

Comments are closed.

Related Items: , , , , , , , , , , , , , , , , , , , , , , ,