download
406 XUD11BTE Engine Fault: Starting difficult or impossible, once started no acceleration, although the fault may disappear after restarting. Fault normally occurs when starting the engine from hot. Cause: Locking of the rotor of the injection pump following wear of the housing. Solution: Read the fault codes, the rotor 2 position sensor must be the only fault code stored. If the decod rotor value is greater than 286 micro-seconds, remove & replace the injection pump. 406 ENGINE XUD11BTE Fault: When pulling away clutch judders. Cause: Slackening of the engine earth on the clutch housing next to the engine block. Solution: Tighten loose earth lead. 406 Petrol models Fault: Battery warning light remains on for 3 seconds after turning the ignition off. Cause: Alternator regulator re-supplies voltage onto the alternator exciter terminal. Solution: Replace the alternator (Denso) with new unit Part No: 5705.1J with modified regulator.
Related posts:
