download
Exploded View Of Convertible Top & Main Folding Bow (Stanchion) CONVERTIBLE TOP MAIN STANCHION
Removal 1. Remove cover from mounting points of main stanchion bearing and side wall panel. Remove rear folding-roof panel. Loosen adhesive of front and rear folding roof cover. Remove screws from fastening 2. Remove nuts and washers from “B” pillar seal and lift seals forward, half opening convertible top. Detach snaps, lower Tenax bases, fastening bolts and corner pieces for tension cable. Separate seam between front and rear roof cover. 3. Loosen seal clamping plate and folding roof cover adhesive and main stanchion. Remove fastening screw from serrated strip and pull away from locating bolt. 4. Remove screws from roof tensioning strips and loosen adhesion. Remove tensioning rubber fastening wire. Loosen remaining adhesive of folding roof cover from main stanchion.
Related posts:
- 2001 Porsche 911 Carrera 4 Cabriolet Alternator Service and Repair
- 2002 Porsche 911 Turbo Suspension Strut Removal/ Installation
- 1999 Porsche 911 Carrera INSTALLING AND REMOVING THE HEATING/ AIR-CONDITIONING UNIT
- 2005 Porsche 911 GT3 Removing and installing battery
- 2004 Porsche Cayenne S Removing and Installing Main Headlight
