s p o n s o r e d   l i n k s


ON?VEHICLE INSPECTION INSPECT INJECTOR OPERATION

0

Filed Under (repair and maintenance tips) by admin on 24-06-2010

Tags: , , , ,

download
ON?VEHICLE INSPECTION 1. INSPECT INJECTOR OPERATION Check operation sound from each injector. (a) With the engine running or cranking, use a sound scope to check that there is normal operating noise in proportion to engine rpm. (b) If you have no sound scope, you can check the injector transmission operation with your finger. If no sound or unusual sound is heard, check the wiring connector, injector or injection signal from the ECU. 2. INSPECT INJECTOR RESISTANCE (a) Disconnect the injector connector. (b) Using an ohmmeter, measure the resistance between the terminals. Resistance: Approx. 13.8W If the resistance is not as specified, replace the injector. (c) Reconnect the injector connector.

Related posts:

  1. Removing and installing injection pump
  2. Electronic Suspension Control Description and Operation
  3. Columbia Workshop Manual Refrigerant Compressor, Sanden Clutch Assembly Removal, Inspection, and Installation
  4. MAC-PHERSON STRUTS STRUT REMOVAL SERVICE MODIFIED MACPHERSON STRUTS
  5. Turn off your Check Engine light

Comments are closed.

Related Items: , , , , , , , , , , , , , , , , , , , , , , ,