download
Rotate crankshaft in direction of rotation to 14o + 0.5o (arrow) after ignition TDC of cylinder 1 Unscrew central securing bolt (40/3) Remove chain tensioner Unplug socket of injection pump (Y23/1) at plug connection Unbolt engine wiring harness (1) at oil filter housing Unplug connector at electronic IFI shutoff (Y1/1) Detach fuel lines (arrows) at the injection pump Unscrew bolt (10/3) Unscrew bolts (10/1) Slacken bolt (30/1) of start of delivery setting device Remove injection pump (10) Replace O-rings (10/4) Install in the reverse order Inspect start of delivery Set start of delivery Injection pump, unit pump, high pressure pump Designation Central bolt for attaching injection pump Bolt of injection pump bracket at rear to engine block Bolt of injection pump front M8 Screw plug to governor housing
Related posts:
- HOW – TO FUEL PUMPS MECHANICAL FUEL PUMP REPLACEMENT
- HOW – TO ENGINE ADDITIVES ENGINE CARBON CLEANER
- Differential Drive Pinion Gear Bearing Replacement (8.6 Inch, 9.5 Inch Axle) Removal Procedure Installation Procedure
- ON?VEHICLE INSPECTION INSPECT INJECTOR OPERATION
- Columbia Workshop Manual Refrigerant Compressor, Sanden Clutch Assembly Removal, Inspection, and Installation
