download
The following diagnostics might be helpful if the vehicle exhibits the conditlon(s) described above. Use the appropriate recommendation based on what symptom has occurred. Recommendation/Instructions No DTCs Review Corporate Bulletin Number 05-02-32-002B to assure you do not have a blown 60 amp steering fuse. The fuse can be blown during improper jump starting of the vehicle on the HHR and ION. Check for this particularly for tow in conditions. DO NOT replace the steering column unless an internal short has been Identified in the column that is causing fuse to blow. Power Steering Warning Message on DIC with DTCs C0176 and C0476 This condition is often the result of excessive lock-to-lock turns of the steering wheel, causing the thermal protection in the Power Steering Control Module (PSCM) to take the steering motor temporarily off line. This is a normal operating characteristic of the system. DO NOT replace the steering column for this condition. Refer to Corporate Bulletin Number 06-02-32-002B for additional information
Related posts:
- DIAGNOSTIC TIPS—COIL ON PLUG (COP) IGNITION SYSTEMS—ENGINE MISFIRE OR ROUGH RUNNING
- Procedure to Disable Illumination of Service Indicator AFTER the Installation of Passive Struts/Shocks
- Turn off your Check Engine light
- Troubleshooting Anti-lock Brake System (ABS) Indicator Light
- CHECK AND ADJUSTMENT OF BRAKE PEDAL
