Auto Repair Manual Free Download and ReviewsFree download ebook pdf files automotive manual

download
1. On vehicles equipped with a manual transmission, remove the shift lever. 2. On vehicles equipped with an automatic transmission, perform the following steps: 2.1. Apply the park brake. 2.2. Insert the ignition key and turn the ignition switch to the RUN position. 2.3. Depress the brake pedal and shift the transmission to the 1 position. 2.4. Turn the ignition switch to the OFF position. CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices. 3. 4. 5. 6. 7. 8. 9. 10. Disconnect the battery negative cable. Remove the left sound insulator. Remove the right instrument panel sound insulator. If the vehicle is equipped with a multiple CD changer located in the center console, remove the center console. Remove the center sound insulator. Remove the lower left instrument panel mounting bolt. Remove and retain the instrument panel storage compartment. Remove the lower right instrument panel mounting bolt. 11. Remove and retain the left and right speakers and the speaker grilles. 12. Use a flat-bladed tool in order to remove the windshield defroster grille. Retain the grille and sunload sensor for use on the next IP carrier. 13. 14. 15. 16. If equipped with a sun load temperature sensor twist the sensor 1/4 turn counterclockwise in order to disengage. Disconnect the brown electrical connection from the body control module (BCM). Disconnect the purple electrical connection from the body control module (BCM). Remove the knee bolster. 1998 Chevy Truck S10/T10 Blazer 2WD V6-4.3L VIN W 17. Remove and retain the instrument cluster. 18. Remove and retain the radio. 19. Remove the HVAC control assembly. CAUTION: Refer to SIR Handling Caution in Cautions

download
Condition Some customers of 1999-2002 Chevrolet Malibu, Oldsmobile Alero, Pontiac Grand Am, and 1999 Oldsmobile Cutlass may have turn signal/hazard flashers that become inoperative.Service Procedure The following procedure provides instructions for replacing the hazard warning switch located in the instrument panel (I/P). For additional information, refer to the Lighting subsection in the Body and Accessories section of the appropriate Service Manual or SI. Malibu 1. Remove the cover from the left side instrument panel (I/P) wiring harness junction block access panel. 2. Remove the AIR BAG fuse from the panel. 3. Remove the three screws attaching the lower steering column cover to the steering column. 4. Remove the upper steering column cover. 5. Remove the two screws that attach the IP cluster bezel to the IP. 6. Using a small flat-blade screwdriver, gently pry out and remove the IP cluster trim plate from the IP. 7. Disconnect the electrical connectors from the other switches in the trim plate. 8. Disconnect the electrical connector from the hazard warning switch. 9. Using a small flat-blade screwdriver, carefully push in on the tabs to release the hazard warning switch from the IP cluster trim plate. 10. Remove the hazard warning switch by pushing in an outward motion on the switch while holding onto the IP cluster trim plate. 11. Install the new hazard warning switch by pushing in an inward motion on the switch while holding onto the IP cluster trim plate. Push inward on the switch until it is fully seated into the IP cluster trim plate. 12. Connect the electrical connector to the hazard warning switch. 13. Connect the electrical connectors to the other switches in the trim plate. 14. Position and align the IP cluster trim plate to the IP and carefully press into place.

download
On all models, the fuse panel is located under the instrument panel, left of the steering column. Fuse & Circuit Breaker Identification 1 – 15 Amp Brake & Hazard Warning Lights, Speed Control Module, Cornering Light Relay 2 – 6-Amp Circuit Breaker Windshield Wiper & Washer Pump, Interval Wiper 3 – Not Used 4 – 15 Amp Taillights, License & Parking Lights, Side Marker & Coach Lights, Cluster Illumination Lights, Radio & Clock Illuminator, A/C-Heater Illumination 5 – 15 Amp Turn Signal & Back-Up Lights, Keyless Entry Illumination, Day/Night Mirror, Turbo Overboost Buzzer 6 – 20 Amp Heated Back Light Control, Deck Lid Release, Electronic Chime Module, Lights Outage & Clock Display, Cornering & Rear Reading Lights, Tripminder, Illuminated Entry, Anti-Theft Module, Radio & Cluster Illumination 7 – 15 Amp Foglights (Turbo Only) 8 – 15 Amp Courtesy & Glove Box Lights, Key Warning Buzzer, Illuminated Entry Module, Remote Electric Mirrors, Electronic Radio & Cluster Memories, Anti-Theft Relay & Clock 9 – 30 Amp A/C-Heater Blower Motor 10 – 20 Amp

download
The fuse box is located under the dashboard to the left of the steering column. The underhood fuse panel (if equipped) is located beside the battery. The circuits protected by each fuse are listed on the plastic sheet inside the cover. FUSE PANEL IDENTIFICATION (1986-89) 1 – 15 Amp Charge Warning Light, Voltage Regulator, Cooling Fan Timer Control Unit, Fuel Cut-off Relay, Speed Sensor, PGM-FI Main Relay, Fuel Pump, Control Solenoid Valves, Emission Control Unit, Speed Sensor (Automatic Seat Belts, 1988-89) ? 2 – 10 Amp Safety Indicator, Shift Lever Position Indicator, Clock & Gauges, Tachometer, Back-Up Lights, Turn Signal Relay & Lights, Integrated Control Unit, Warning Lights, Cruise Control Indicator, Light Dimming Circuit, Automatic Seat Belt Control Unit, Shift Lock Solenoid (1989) 3 – 20 Amp Wiper Motors, Washer Motors, Intermittent Wiper Relay, Sun Roof Relays,Power Window Relay 4 – 7.5 Amp Cruise Control Unit, Cruise Control Indicator Light 5 – 10 Amp Rear Window Defogger Relay, Rear Window Defogger Indicator Light, Heater Control Amplifier, Fan Motor, A/C Compressor Clutch & Relay, A/C Delay Unit, Heater Control Panel 6 – 10 Amp Right Headlight Low Beam 7 – 10 Amp Left Headlight Low Beam 8 – 15 Amp Left Headlight High Beam 9 – 15 Amp Right Headlight High Beam, High Beam Indicator Light 10 – 7.5 Amp Brake Warning Bulb Check Circuit, PGM-FI ECU, PGM-FI Main Relay, Emission Control Unit 11 – 15 Amp Headlight Retractor Control Unit (Up) 12 – 15 Amp Power Door Mirrors, EFE Heater Unit, Radiator Fan Relay, Cooling Fan Timer Unit 13 – 10 Amp Power Antenna Motor, Stereo Radio/Cassette Player, Power Amplifier (SEi Model) 14 – 15 Amp Vanity Mirror Light, License Plate Lights, Taillights, Rear Side Marker Lights, Dash Light Brightness Control Unit, Cigarette Lighter Illumination, Ashtray Light, Headlight Retractor Control Unit (Light-On), Dash & Switch Lights 15 – UNDERHOOD FUSE PANEL IDENTIFICATION (1986-89)

download
The fuse box is located under dashboard on driver’s side. Underhood fuse panel is located in engine compartment beside battery. Cars equipped with anti-lock brake system have a third fuse box for ABS in front of the engine compartment on passenger’s side. FUSE PANEL IDENTIFICATION (1988-91) Fuse & Circuit Breaker Identification 1 – 10 Amp Integrated Control Unit, Combination Switch, Gauge Assembly, Back-Up Lights Switch, Shift Position Console Switch, Clock (1990), Shift Lock Solenoid (1990), Interlock Control Unit (1990), Automatic Seat Belts (If Equipped) 2 – 10 Amp Starter Solenoid, PGM-FI Main Relay, PGM-FI Electronic Control Unit, Integrated Control Unit 3 – 20 Amp Power Door Locks (If Equipped) 4 – 10 Amp Right Headlight High Beam, High Beam Indicator Light, Daytime Running Lights Relay (Canada) 5 – 10 Amp Left Headlight High Beam 6 – 30 Amp Sun Roof Motor (If Equipped) 7 – 10 Amp Rear Lights (Canada Only) 8 – 10 Amp Integrated Control Unit, Interior & Exterior Lighting 9 – Blank