Filed Under (Mazda) by admin on 19-09-2009
COVERS ALL MODELS & ALL REPAIRS A-Z
THIS IS NOT GENERIC REPAIR INFORMATION! IT IS VEHICLE SPECIFIC. THIS IS THE EXACT SAME MANUAL USED BY TECHNICIANS AT THE DEALERSHIPS TO MAINTAIN, SERVICE, DIAGNOSE AND REPAIR YOUR VEHICLE.
COMPLETE STEP-BY-STEP INSTRUCTIONS, DIAGRAM’S, ILLUSTRATION’S, WIRING SCHEMATICS, AND SPECIFICATIONS TO COMPLETELY REPAIR YOUR VEHICLE WITH EASE!
YOU GET EVERYTHING YOU WILL EVER NEED ON ONE EASY-TO-USE CD-MANUAL. NO MORE FLIPPING THROUGH BOOKS TO FIND WHAT YOU NEED. PRINT ONLY THE PAGES AND DIAGRAMS YOU REQUIRE
Filed Under (volkswagen) by admin on 30-03-2010
Service and Repair Manual. Models covered. VW Golf & Jetta
VW Golf & Jetta Service and Repair Manual
VW Golf & Jetta Mk 2 models with petrol engines, including fuel injection, catalytic converter,
Formel E, 16-valve and special/limited edition models 1043 cc, 1272 cc, 1595 cc & 1781 cc
Covers mechanical features of Van. Does not cover Convertible, Rallye, Caddy, diesel engine, 4 -wheel drive, Mk 1 models
or new Golf range introduced in February 1992
Filed Under (Dodge) by admin on 17-08-2010
NOTE: Before starting this procedure, be certain to turn the steering wheel until the front wheels are in the straight-ahead position. 1. 2. 3. 4. 5. Disconnect and isolate the battery negative cable. Remove the trim from the right and left front door sills. Remove the trim from the left and right cowl side inner panels. Remove the steering column opening cover from the instrument panel. See: Steering Column Opening Cover and Knee Blocker Replacement Remove the two screws that secure the inside hood latch release handle to the instrument panel lower reinforcement and lower the release handle to the floor. Disconnect the driver side airbag module wire harness connector from the instrument panel wire harness at the instrument panel lower reinforcement. If the vehicle is so equipped, disconnect the overdrive lockout switch wire harness connector from the instrument panel wire harness near the instrument panel lower reinforcement. Remove the steering column from the vehicle, but do not remove the driver side airbag module, the steering wheel, or the switches from the steering column. Be certain that the steering wheel is locked and secured from rotation to prevent the loss of clockspring centering. Refer to Steering and Suspension/Steering/Steering Column/Service and Repair. See: Steering and Suspension/Steering/Steering Column/Service and Repair From under the driver side of the instrument panel, perform the following: a. Remove the screw from the center of the headlamp and dash to instrument panel bulkhead wire harness connector and disconnect the connector. b. Disconnect the two body wire harness connectors from the two instrument panel wire harness connectors that are secured to the outboard side of the instrument panel bulkhead connector. c. Disconnect the three wire harness connectors (one from the body wire harness, and two from the headlamp and dash wire harness) from the three junction block connector receptacles located closest to the dash panel. d. Unsnap the plastic retainer clip that secures the park brake release linkage rod to the lever on the back side of the park brake release handle and disengage the linkage rod end from the lever on the handle. e. Disconnect the instrument panel wire harness connector from the stop lamp switch connector receptacle. f. Disconnect the vacuum harness connector located near the left end of the heater-A/C housing. Remove the center support bracket from the instrument panel. See: Instrument Panel Center Support Bracket Replacement Remove the screw that secures the instrument panel wire harness ground eyelets to the left side of the Airbag Control Module (ACM) mount on the floor panel transmission tunnel. Disconnect the instrument panel wire harness connector from the ACM connector receptacle. Remove the glove box from the instrument panel. Refer to Body and Frame/Interior Trim/Glove Compartment/Service and Repair. See: Glove Compartment/Service and Repair Reaching through the instrument panel glove box opening, perform the following: a. Disconnect the two halves of the radio antenna coaxial cable connector near the center of the lower instrument panel glove box opening. b. Disengage the antenna half of the radio antenna coaxial cable from the retainer clip near the outboard side of the lower instrument panel glove box opening. c. Disconnect the blower motor wire harness connector located near the heater-A/C housing support brace on the inboard side of the instrument panel glove box opening. From under the passenger side of the instrument panel, perform the following: a. If the vehicle is so equipped, disconnect the two instrument panel wire harness connectors from the Infinity speaker amplifier connector receptacles on the right cowl side inner panel. b. Remove the nut that secures the instrument panel wire harness radio ground eyelet to the stud on the right cowl side inner panel. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15.
Filed Under (Vauxhall) by admin on 05-04-2011
Disconnect battery. Disconnect harness multi-plug from engine coolant temperature (ECT) sensor Fig.1  . Disconnect harness multi-plug from mass air flow (MAF) sensor Fig.1  . Remove protective cover Fig.1  . Remove plastic tube from wiring harness Fig.1  . Remove insulation tape from wiring harness. Cut engine coolant temperature (ECT) sensor wiring and remove from cable ducting. Cut new engine coolant temperature (ECT) sensor wiring a minimum of 120 mm long. Fit new wiring harness multi-plug to wires Fig.2. Repair wiring with repair kit listed. Seal with insulation tape Fig.3. Remove engine coolant temperature (ECT) sensor. Fit modified engine coolant temperature (ECT) sensor. Tightening torque: 18 Nm. Refit wiring harness multi-plug. Reconnect battery. Erase fault memory.
Filed Under (volkswagen) by admin on 03-09-2009
VW Rabbit, Jetta, Scirocco, Pick-up & Convertible (gasoline engine) 1975-1992 Auto Repair Manual
Provides service, repair and maintenance information for all Rabbit, Golf, Jetta, Scirocco, Pick-up and Cabriolet Convertible gasoline models (1975-1992) Rabbit Convertible (1980-1992)