2001 dodge caravan p0420
You are searching repair manual in PDF format about 2001 dodge caravan p0420 use another keyword for search another post or files
Filed Under (Dodge) by admin on 27-09-2009
REPLACEMENT BODY PANELS Index# Description Year Mill Part# 01 Grille, chrome/black, w/o LE pkg. Caravan 91-95 85-91-01 03Grille, chrome/silver/gray, Voyager 91-95 85-91-03 05 Radiator support panel93-95
85-93-0512 Front bumper cover painted, w/o fog lamps
91-9385-91-12 12 Front bumper cover painted, w/o fog lamps94-95 85-94-12 13 Front bumper reinforcement bar 91-92
85-91-1313Front bumper reinforcement bar
Filed Under (Ford) by admin on 27-04-2010
ISSUE Some 2001-2005 Taurus/Sable, 2001-2006 Escape and 2005-2006 Mariner vehicles built prior to
1-17-2006 equipped with the 3.0L 4V Duratec engine may exhibit a ticking noise from the left bank cylinder head, with the engine at normal operating temperature only.
ACTION To diagnose, with the engine running and warm (normal operation temperature), using a mechanic’s stethoscope determine if the ticking noise is coming from the left hand intake camshaft at cylinder number 6, (Figure 1). If the ticking noise can be verified, refer to the following Service Procedure.
Filed Under (Buick) by admin on 14-11-2010
Steering Vibration/Shudder/Moan During Parking Maneuvers on Dry Pavement (Install Power Steering Pressure (Inlet) and/or Return (Outlet) Hose Assembly) 1995-99 Buick Riviera 1997-2001 Buick Park Avenue, Ultra 2000-2001 Buick LeSabre 2000-2001 Pontiac Bonneville steering vibration, shudder or moan noise when steering during parking maneuvers on dry pavement. Correction Install a new power steering pressure (inlet) hose assembly on the following vehicles: • 1995-98 Buick Riviera • 1997-98 Buick Park Avenue and Ultra Install a new power steering pressure (inlet) and return (outlet) hose assembly on the following vehicles: • 1999 Buick Riviera • 1999-2001 Buick Park Avenue and Ultra • 2000-2001 Buick LeSabre • 2000-2001 Pontiac Bonneville 1. Verify that the power steering pump reservoir is full. • If fluid level is low, fill and check for leaks. • If power steering system has air in the system, perform the “Bleeding Air from Power Steering System” procedure as described in the Power Steering System sub-section of the Service Manual. Important: When performing the “Bleeding Air from Power Steering System” procedure, it is important that the front of the vehicle is supported by the lower control arms. If the vehicle is not supported by the lower control arms, the procedure may cause the strut bushing to dislocate and cause new concern. Verify that the accessory drive belt is in good condition and that the pulleys are not bent or damaged. Verify proper belt tension and operation of the belt tensioner. Check for power steering hose ground out conditions. Check for good engine idle and correct engine RPM. Check to see that the rear transaxle mount does not have a plastic assembly aid installed which is used 2. 3. 4. 5. 6.
Filed Under (Mazda) by admin on 19-09-2009
COVERS ALL MODELS & ALL REPAIRS A-Z
THIS IS NOT GENERIC REPAIR INFORMATION! IT IS VEHICLE SPECIFIC. THIS IS THE EXACT SAME MANUAL USED BY TECHNICIANS AT THE DEALERSHIPS TO MAINTAIN, SERVICE, DIAGNOSE AND REPAIR YOUR VEHICLE.
COMPLETE STEP-BY-STEP INSTRUCTIONS, DIAGRAM’S, ILLUSTRATION’S, WIRING SCHEMATICS, AND SPECIFICATIONS TO COMPLETELY REPAIR YOUR VEHICLE WITH EASE!
YOU GET EVERYTHING YOU WILL EVER NEED ON ONE EASY-TO-USE CD-MANUAL. NO MORE FLIPPING THROUGH BOOKS TO FIND WHAT YOU NEED. PRINT ONLY THE PAGES AND DIAGRAMS YOU REQUIRE
Filed Under (Ford) by admin on 27-01-2011
ISSUE Some 2001-2005 Escape vehicles equipped with a 3.0L engine may exhibit idle speeds outside the specified range. Some 2001-2003 Escape vehicles equipped with a 3.0L engine and CD4E automatic transaxle may exhibit a transmission shudder. ACTION Follow the Service Procedure steps to correct the condition. SERVICE PROCEDURE 1. If the concern is a 2001-2005 Escape with idle speeds outside the specified range: a. Install a new idle air control (IAC) valve with jumper harness included in the kit. The new Denso brand IAC will be installed with the electrical connector facing the opposite direction of the original (Hitachi) valve which is why the jumper harness is required. The original (Hitachi) IAC connector faces the front of the vehicle while the new Denso IAC connector faces toward the rear of the vehicle. b. Referring to the calibration charts (Figures 1 and 2), select the applicable file and reprogram the powertrain control module (PCM) using the TSB Service Procedure and WDS/IDS release B40.5 and higher. Calibration files may also be obtained at www.motorcraft.com. 2. If the concern is a 2001 – 2003 Escape with transaxle shudder, drain, flush and refill the transmission fluid with MERCON® Multi-Purpose Automatic Transmission Fluid. Then, referring to the calibration charts (Figures 1 and 2), select the applicable file and reprogram the PCM using the TSB Service Procedure and WDS/IDS release B40.5 and higher. Calibration files may also be obtained at www.motorcraft.com. 3. When reprogramming the PCM use blank path programming. Select the proper file from the chart and manually enter the PCM part number or tear tag number to obtain the updated calibration file. If the concern is a 2001-2005 Escape with idle speeds outside the specified range: a. Install a new idle air control (IAC) valve with