2001 hyundai accent alternator bracket bolt and nut


You are searching repair manual in PDF format about 2001 hyundai accent alternator bracket bolt and nut use another keyword for search another post or files




CHRYSLER ALTERNATOR REMOVAL & INSTALLATION

0

Filed Under (Chrysler) by admin on 28-12-2010

download
CHRYSLER ALTERNATOR See Figures 1, 2, 3, 4 and 5 Fig. 1: Alternator mounting-2.2L and 2.5L engines Fig. 2: Disconnecting alternator wiring-2.2L and 2.5L engines Fig. 3: Disconnecting alternator wiring Fig. 4: Removing the pivot bolt and nut Fig. 5: Removing the alternator from the vehicle Disconnect the negative battery cable. Label and disconnect the wiring (for easy installation). Remove the air conditioning compressor drive belt, if equipped. Loosen the alternator adjusting bracket bolt and adjusting bolt. Remove the alternator belt. 5. Remove the bracket and mounting bolts. 6. Remove the pivot bolt and nut. 7. Lift the alternator from the vehicle. When lifting the alternator out of the vehicle on some years with A/C, clearance may be restricted by the condenser cooling fan assembly or the A/C compressor and mounting bracket assembly, if so, removal of one of these items will be necessary. 8. Position the alternator against the engine. 9. Install the pivot bolt and nut. 10. Install the mounting bracket bolts, and adjusting bolt. 11. Install drive belts and adjust to specification. 12. Tighten all the mounting bolts and nuts. 13. Connect all alternator terminals. 14. Connect the negative battery cable. Disconnect the negative battery cable. Disconnect the wiring and label for easy installation. Remove the air conditioning compressor drive belt. Loosen the alternator adjusting bracket locknut and adjusting screw. Remove the alternator belt. 5. Remove the bracket locknut and mounting bolt. 6. Remove the pivot bolt and nut. 7. Remove the alternator from the engine. 8. Position the alternator against the engine. 9. Install pivot bolt and nut. 10. Set the mounting bracket in place and install the bracket mounting bolt and locknut. 11. Install the drive belts and adjust to specification. 12. Tighten all the mounting bolts and nuts. 13. Connect all alternator terminals. 14. Connect the negative battery cable.

2002 Hyundai Accent 1.6L, Vin C 2003 Hyundai Accent GS 1.5L Difficulty filling the gas tank The pump keeps clicking off

0

Filed Under (Hyundai) by admin on 25-04-2010

download
1. Disconnect the vapor line at the charcoal canister that comes from the liquid vapor separator and goes to the charcoal canister. See if the fuel tank can be easily filled then. 2. If the fuel tank can easily be filled with the vapor line removed from the charcoal canister, reconnect the vapor line and remove the other lines from the charcoal canister and see if the fuel tank can be easily filled. 3. If the fuel tank is once again difficult to fill, replace the charcoal canister. 4. If disconnecting the vapor line at the charcoal canister does NOT make the fuel tank easy to fill, then disconnect the vapor line from the liquid vapor separator at
the fuel tank in case the vapor line is plugged/restricted. Charcoal Canister Liquid Vapor Separator Vapor Line Fuel vapors are directed to the canister from the ORVR fill vent valve in the gas tank through the liquid vapor separator and to the canister. The metal tube that
loops up by the filler neck is part of the vapor line to the canister.

2000 Isuzu Trooper S TORQUE SPECIFICATIONS

0

Filed Under (Isuzu) by admin on 13-11-2010

download
Application Axle Housing Mounting Bolt Step 1 Step 2 Camshaft Idler Pulley Bolt Camshaft Sprocket Bolt Camshaft Timing Chain Tensioner Bolt Common Chamber Duct Bolt Connecting Rod Nut Coolant Manifold Bolt Crankshaft Pulley Bolt Cylinder Head Bolt (1) M8 M11 DIS Module Assembly Bolt Engine Hanger Bolt Nut Engine-To-Transmission Bolt EGR Valve Bolt (Manifold Side) Exhaust Manifold Bolt Nut Exhaust Pipe Bolt & Nut Stud Nut Fan Pulley Bolt Flywheel Bolt Front Plate Bolt (Timing Belt) Heater Pipe Bolt Idler Arm Retaining Bolt Lock Plate Bolt Lower Intake Manifold Bolt Main Bearing Cap Bolt (2) Main Bearing Cap Side Bolt (2) Mount-To-Chassis Bolt Oil Cooler Bolt

1996-2000 Hyundai Accent/ Hyundai Pony/ Hyundai Excel Trouble code identification

0

Filed Under (Hyundai) by admin on 07-06-2010

download
Idle air control (IAC) valve – circuit malfunction Wiring, IAC valve, ECM Injector 2 or 3 – circuit malfunction Wiring, injector Mass air flow (MAF) sensor – circuit malfunction Wiring, MAF sensor, ECM Idle air control (IAC) valve – circuit malfunction Wiring, IAC valve, ECM Wiring, HO2S, mechanical fault, fuel system, fuel Heated oxygen sensor (HO2S) – malfunction pressure, ECM AC cooling fan – circuit malfunction Wiring, AC cooling fan Idle air control (IAC) valve – circuit malfunction Wiring, IAC valve, ECM Engine coolant temperature (ECT) sensor – circuit malfunction Wiring, ECT sensor, ECM Intake air temperature (IAT) sensor – circuit malfunction Wiring, IAT sensor, ECM

2001 Land Rover Discovery Alternator: Service and Repair

0

Filed Under (land rover) by admin on 11-09-2010

download
Remove 1. Remove auxiliary drive belt. 2. Remove 2 bolts securing alternator to mounting bracket. 3. Release alternator from mounting bracket 4. Remove nuts securing alternator cables, and release cables. 2001 Land Rover Discovery II V8-4.0L 5. Remove alternator from mounting bracket. 6. Remove pulley from alternator. Refit 1. 2. 3. 4. 5. 6. Fit alternator pulley and tighten nut to 80 Nm (59 lbf.ft). Position alternator to mounting bracket. Connect alternator cables and tighten B+ nut to 18 Nm (13 lbf.ft), and D+ nut to 5 Nm (3.7 lbf.ft). Locate alternator in mounting bracket. Fit alternator mounting bolts and tighten to 45 Nm (33 lbf.ft). Fit auxiliary drive belt.