Kia rio airbag removal


You are searching repair manual in PDF format about Kia rio airbag removal use another keyword for search another post or files



  Kia rio airbag removal Direct Download speed 5787 Kb/s

  Kia rio airbag removal Full Version speed 6767 Kb/s




1998 Dodge Durango Air Bag Service and Repair REMOVAL

0

Filed Under (Dodge) by admin on 18-01-2011

download
Driver Side 1. Disconnect and isolate the battery negative cable. If the airbag has not been deployed, wait two minutes for the system capacitor to discharge before further service. Driver Side Airbag Module Remove/Install 2. From the underside of the steering wheel, remove the two screws that secure the driver side airbag module to the steering wheel. 3. Pull the airbag module away from the steering wheel far enough to access the wire harness connectors on the back of the airbag module. 4. Unplug the airbag module and horn switch wire harness connectors from the back of the airbag module. 5. Remove the driver side airbag module from the steering wheel. 6. If the airbag has been deployed, the clockspring must be replaced. See Clockspring in the Replacement for the procedures. 7. When installing the airbag module, connect the clockspring wire harness connector to the module by pressing straight in on the connector. Be certain that the connector is fully engaged by observing the latch arms on each side of the connector. When these arms move outward from the connector, the connector is latched. 8. Connect the horn switch wire harness connectors. 9. Install the airbag module in the steering wheel. Tighten the mounting screws to 10.2 N.m (90 in. lbs.) . 10. Do not connect the battery negative cable at this time. See Airbag System in the Diagnosis and Testing for the proper procedures. Passenger Side The following procedure is for replacement of a faulty or damaged passenger side airbag module. If the passenger side airbag module has been deployed, the instrument panel assembly must be replaced. The instrument panel assembly includes a passenger side airbag and airbag door. Refer to Instrument Panel, Gauges and Warning Indicators/Instrument Panel/Instrument Panel Assembly Replacement. 1. Disconnect and isolate the battery negative cable. If the airbag has not been deployed, wait two minutes for the system capacitor to discharge before

Related entry:

2005 ford crown vic remove drivers airbag, 2002 montana airbag removal, 2002 jetta airbag wire diagram, mercury marquis passenger airbag removal, 2011 malibu airbag removal, 1998 chevy silverado disarm sir, how to remove passenger airbag 1998 dodge dakota, prius airbag ecu locattion, peugeot 107 airbag fuse, remove air bag 2004 chevy cavaleir,

2003 Kia Rio Cinco Service and Repair TIMING BELT

0

Filed Under (KIA) by admin on 05-08-2010

download
REMOVAL 1. Disconnect negative battery cable. 2. Loosen power steering lock bolts and nuts accordingly and remove tension from Power Steering (P/S) and/or Air Conditioning (A/C) compressor drive belt. 3. Remove P/S and/or A/C drive belt. 4. Loosen generator mounting bolts and adjusting bolt. 5. Remove generator bolts. 6. Remove water pump pulley. 7. Remove crankshaft pulley and timing belt guide plate. 8. Remove upper and lower timing belt covers. 9. Turn crankshaft so that timing mark on timing belt pulley is aligned with timing mark on engine. 10. Check that “I” mark on intake camshaft pulley is aligned with mark on cylinder head cover and “E” mark on exhaust camshaft pulley is aligned with mark on cylinder head cover. NOTE: Do not move camshaft or crankshaft once timing marks have been correctly positioned. 11. Loosen tensioner pulley lock bolt. 12. Protect timing belt with a rag. 13. Remove tensioner pulley. 14. Remove timing belt. NOTE: Mark the direction of timing belt rotation (on the timing belt) for proper reinstallation. INSPECTION NOTE: Never forcefully twist, turn inside out or bend timing belt. Do not allow oil or grease to come in contact with timing belt. 1. Replace timing belt if it is contaminated with oil or grease.

Related entry:

2003 kia optima engine diagram, 2002 kia rio cinco repair manual,

2006-2009 Hyundai Accent 2006-2009 Kia Rio Dash Disassembly

0

Filed Under (Hyundai) by admin on 16-08-2010

download
1 Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Unclip and remove the trim panel surrounding the radio and includ- ing the a/c vents. (Figure A) 3 Remove (4) Phillips screws securing the radio. (Figure B) 4 Disconnect and remove radio. (Figure B) Continue to KIT ASSEMBLY. 1 KIA RIO: Cut and remove shaded areas #1. (Figure A) HYUNDAI ACCENT: Cut and remove shaded areas #2. (Figure A) 2 Slide the DIN cage into the Radio Housing and secure by bending the metal locking tabs down. (Figure B) 3 Slide the aftermarket head unit into the cage until secure. (Figure C) Continue to final assembly.

Related entry:

2009 kia rio 4 cyl vent control solenoid location, suzuki forenza 2006 warning lights, 2005 kia rio valve lifters, 2009 kia rio firing order, 2001 kia dash removal, chevy silverado ratterling under steering wheel felt in gas pedal, dashfaults2006suzukiforenza, diamage 2009 kia rio firing order, how do you chang the dash light on a 2006 buick lacrossr, kia rio 1 3 work shop manual,

2003 Ford Explorer Radiator Cooling Fan and Shroud Removal

0

Filed Under (Ford) by admin on 18-02-2011

download
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Section 100-00. 2. If servicing the radiator lower fan shroud or the radiator, drain the cooling system. For additional information, refer to Cooling System Draining, Filling and Bleeding in this section. 3. Remove the parts in the order indicated in the following illustrations and tables. To remove individual parts, only carry out the listed steps: 4. To install, reverse the removal procedure. If servicing the radiator lower fan shroud or the radiator, fill and bleed the cooling system. For additional information, refer to Cooling System Draining, Filling and Bleeding in this section. Item 9: Lower Degas Bottle Hose Removal Note 1. Remove the lower degas bottle hose from the clip on the radiator lower fan shroud. Item 10: A/C Tube Removal Note 1. On 4.6L engines, detach the A/C tube from the retainers. Item 11: Transmission Cooler and A/C Tubes Removal Note 1. Disconnect the transmission cooler tubes. Remove the safety retainers from the transmission cooler tubes. Using the special tool, disconnect the quick coupler. If equipped, loosen and remove the screw clamp from the hose. 2. Remove the A/C tube brackets from the engine front cover. Item 12: Radiator Fan Shroud Screw Removal Note 1. Not all vehicles will have these radiator fan shroud screws. If vehicle is equipped with these screws, please discard them. Item 15: Cooling Fan Removal Note 1. CAUTION: Cardboard must be placed against the radiator when removing the cooling fan. Failure to follow these procedures can result in damage to the vehicle. Place a piece of cardboard against the radiator to prevent damage while removing the cooling fan. 2. Using the special tools, remove the fan blade and the clutch assembly. Item 17: Radiator Lower Fan Shroud Removal Note 1. Remove the power steering tube from the clip on the radiator lower fan shroud. Item 19: Radiator Bracket Bolt Removal Note 1. If necessary, remove the radiator brackets. Item 21: A/C Condenser Support Bracket Bolt Removal Note 1. If necessary, remove the condenser brackets. Item 22: Radiator Removal Note 1. NOTE: It will be necessary to lift the radiator assembly up off the mounts and set it on the frame in order to separate the A/C condenser from the radiator. NOTE: RH side shown, LH side similar. Remove the radiator up off the mounts and set it on the frame. 2. Remove the left inner air deflector from the A/C condenser.

Related entry:

toyota rav 4 radiator support, 2000 f150 radiator support patch panels, how to remove a radiator from an 02 jeep liberty, remove radiator from dodge jouney, flush radiator 2007 silverado, how to remove the fan shroud on a mercedes ml320, 1978 Plymoulth / Dodge Colt 1 6 97 5 radiator, how to replace a radiator in a 2002 chevy tracker, tool to remove fan clutch on 1999 s10 2 2l, testfanswitchon2003hondacivic,

2004 Ford Explorer Radiator Cooling Fan and Shroud Removal

0

Filed Under (Ford) by admin on 22-02-2011

download
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Section 100-00. 2. If servicing the radiator, drain the cooling system. For additional information, refer to Cooling System Draining, Filling and Bleeding in this section. 3. Remove the parts in the order indicated in the following illustrations and tables. 4. To install, reverse the removal procedure. If servicing the radiator, fill the cooling system. For additional information, refer to Cooling System Draining, Filling and Bleeding in this section. Item 9: Lower Degas Bottle Hose Removal Note 1. Remove the lower degas bottle hose from the clip on the radiator lower fan shroud. Item 10: A/C Tube Removal Note 1. On 4.6L engines, detach the A/C tube from the retainers. Item 11: Transmission Cooler and A/C Tubes Removal Note 1. Disconnect the transmission cooler tubes. Remove the safety retainers from the transmission cooler tubes. Using the special tool, disconnect the quick coupler. If equipped, loosen and remove the screw clamp from the hose. 2. Remove the A/C tube brackets from the engine front cover. Item 12: Radiator Fan Shroud Screw Removal Note 1. Not all vehicles will have these radiator fan shroud screws. If vehicle is equipped with these screws, please discard them. Item 15: Cooling Fan Removal Note 1. CAUTION: Cardboard must be placed against the radiator when removing the cooling fan. Failure to follow these procedures can result in damage to the vehicle. Place a piece of cardboard against the radiator to prevent damage while removing the cooling fan. 2. Using the special tools, remove the fan blade and the clutch assembly. Item 17: Radiator Lower Fan Shroud Removal Note 1. Remove the power steering tube from the clip on the radiator lower fan shroud. Item 19: Radiator Bracket Bolt Removal Note 1. If necessary, remove the radiator brackets. Item 21: A/C Condenser Support Bracket Bolt Removal Note 1. If necessary, remove the condenser brackets. Item 22: Radiator Removal Note 1. NOTE: It will be necessary to lift the radiator assembly up off the mounts and set it on the frame in order to separate the A/C condenser from the radiator. NOTE: RH side shown, LH side similar. Remove the radiator up off the mounts and set it on the frame. 2. Remove the left inner air deflector from the A/C condenser. 3. Remove the right inner air deflector from the A/C condenser.

Related entry:

1998 Chevy C2500 Dash Removal, how to remove arm rest grand marquis, flushing cooling system 2004 trailblazer, condensor replacing 1999 dakota, how to remove radio from dash in a 1998 chevy K1500, Kia Carens Gearbox Removal, how to remove glove box 2009 Chevy Traverse, remove dash chevy aveo, how to remove dash of 98 silverado, remove mercedes sprinter dash board,