WHAT CAN CAUSE AN OIL leak ON VW POLO 2005


You are searching repair manual in PDF format about WHAT CAN CAUSE AN OIL leak ON VW POLO 2005 use another keyword for search another post or files



  WHAT CAN CAUSE AN OIL leak ON VW POLO 2005 Direct Download speed 5787 Kb/s

  WHAT CAN CAUSE AN OIL leak ON VW POLO 2005 Full Version speed 6767 Kb/s




2006 – 2007 Toyota vehicles SHOCK ABSORBER REPLACEMENT CRITERIA

0

Filed Under (Uncategorized) by admin on 13-10-2010

download
CONDITION Slight oil seepage from oil seal case Moderate oil seepage from oil seal case ACTION Normal oil evaporation — NOT necessary to replace the shock absorber Normal oil evaporation — NOT necessary to replace the shock absorber Oil leak/drip on the seal case, extending below the spring seat Abnormal oil leak — Replace the shock absorber Oil leak, covering top, spring seat, and part of strut body Abnormal oil leak — Replace the shock absorber Oil leak, covering entire strut body, spring seat, and knuckle bracket Abnormal oil leak — Replace the shock absorber CONDITION Slight oil seepage from oil seal case Moderate oil seepage from oil seal case ACTION Normal oil evaporation — NOT necessary to replace the shock absorber Normal oil evaporation — NOT necessary to replace the shock absorber Oil leak/drip on the seal case, extending below the spring seat Abnormal oil leak — Replace the shock absorber Oil leak, covering top, spring seat, and part of shock body Abnormal oil leak — Replace the shock absorber Oil leak, covering entire shock body and spring seat, and extending to lower bushing Abnormal oil leak — Replace the shock absorber

Related entry:

INSTALL AN OIL PUMP ON A 98 BUICK LESABRE\, oilhose for 2000 chrysler 300m, 2006 equinox r&r oil pan gasket, how replace rear absorber shock yaris 2007, how to install sprinter van shocks, Mallory Distributor vent hole oil leak, leaky rear shock toyota yaris, kia sorento shock leaking, how to change trhe shocks from 08 toyota yaris, how to replace shocks for 2001 xj8 jaguar,

2003 Buick Century Engine Oil and Oil Filter Replacement Removal Procedure

0

Filed Under (Buick) by admin on 15-12-2010

download
1. 2. 3. 4. 5. Raise and support the vehicle. Refer to Vehicle Lifting. Position the oil drain pan under the engine oil drain plug. Remove the engine oil drain plug. Clean and inspect the engine oil drain plug, repair or replace if necessary. Clean and inspect the engine oil drain plug sealing surface on the oil pan, repair or replace oil pan if necessary. 6. Remove the oil filter. 7. Clean and inspect the oil filter sealing area on the engine block, repair or replace if necessary. Installation Procedure 1. Lightly oil the replacement oil filter gasket with clean oil and install the new oil filter. Notice: Refer to Fastener Notice in Service Precautions. 2. Install the new oil filter. Tighten the new oil filter to 3/4 to 1 full turn, after the oil filter gasket contacts the oil filter mounting surface. 3. Install the engine oil drain plug. Tighten the plug to 30 Nm (22 ft. lbs.) . 4. 5. 6. 7. 8. 9. Remove the oil drain pan. Lower the vehicle. Fill the engine with new engine oil. Start the engine. Inspect for oil leaks after engine start up. Turn off the engine and allow the oil a few minutes to drain back into the oil pan. Remove the oil level indicator from the oil level indicator tube. Clean off the indicator end of the oil level indicator with a clean paper towel or cloth. Install the oil level indicator into the oil level indicator tube until the oil level indicator handle contacts the top of the oil level indicator tube. Again, remove the oil level indicator from the oil level indicator tube keeping the tip of the oil level indicator down. Check the level of the engine oil on the oil level indicator. If necessary, adjust the oil level by adding or draining the engine oil. 10. 11. 12. 13. 14. 15.

Related entry:

where is oil filter located on honda muv700, Sanden AC Compressor Oil Capacity, 5 3 oil level sensor, ac compressor oil capacity chart, were is a 2008 uplander oil pressure switch located, ford escape 2009 engine oil drain plug?, transit duratorg 2 4 oil change, 2010 nissan cube transmission pan replacement, diagram of 2011 mazdacx9 oil drain plug, DIY replace atf OIL AVANZA,

Oil Filter Cap Assembly Precautions

0

Filed Under (Toyota) by admin on 20-05-2011

download
To prevent damage to the oil ?lter cap assembly, this procedure must be closely followed during oil ?lter replacement to avoid immediate and future oil ?lter serviceability concerns. The following engines are equipped with a plastic oil ?lter cap assembly: • 1UR-FE (Tundra, Sequoia) • 3UR-FE (Tundra, Sequoia, Land Cruiser) • 2ZR-FE (Corolla, Matrix) • 1AR-FE (Highlander, Venza) • 2AR-FE (RAV4, Camry) Repair Procedure NOTICE During oil ?lter replacement: • Ensure that SST 09228-06500-02 or 09228-06501 is used to remove and install the oil ?lter cap — or damage to the cap may occur. • Inspect the SST for any damage or distortion before use. • Con?rm that the SST is fully seated on the oil ?lter cap when removing/installing (see Figure 1). Figure 1. 1 3 4 1 2 3 4 • Ensure a torque wrench is used for oil ?lter cap installation. Torque: 25 +/- 5 N*m (255 +/- 51 kgf*cm, 18 +/- 3.7 ft*lbf) • There is a possibility the oil ?lter cap will be dif?cult to remove if the torque range is exceeded. FAILURE TO FOLLOW THE INSTRUCTIONS ABOVE MAY RESULT IN OIL FILTER CAP AND/OR SST DAMAGE. With Drain Plug Without Drain Plug Oil Filter Cap SST (09228-06500-02 or 09228-06501) Refer to the Technical Information System (TIS) when replacing the oil ?lter, applicable model and model year Repair Manual: • 2010 Camry: Engine/Hybrid System – Lubrication – “2AR-FE Lubrication: Oil and Oil Filter: Replacement” • 2009 / 2010 Corolla: Engine/Hybrid System – Lubrication – “2ZR-FE Lubrication: Oil and Oil Filter: Replacement” • 2009 Highlander: Engine/Hybrid System – Lubrication – “1AR-FE Lubrication: Oil and Oil Filter: Replacement” • 2008 / 2009 Land Cruiser: Engine/Hybrid System – Lubrication – “3UR-FE Lubrication: Oil and Oil Filter: Replacement” • 2009 / 2010 Matrix: Engine/Hybrid System – Lubrication – “2ZR-FE Lubrication: Oil and Oil Filter: Replacement” • 2009 RAV4: Engine/Hybrid System – Lubrication – “2AR-FE Lubrication: Oil and Oil Filter: Replacement” • 2008 / 2009 / 2010 Sequoia (3UR-FE): Engine/Hybrid System – Lubrication – “3UR-FE Lubrication: Oil and Oil Filter: Replacement” • 2010 Sequoia (1UR-FE): Engine/Hybrid System – Lubrication – “1UR-FE Lubrication: Oil and Oil Filter: Replacement” • 2007 / 2008 / 2009 / 2010 Tundra (3UR-FE): Engine/Hybrid System – Lubrication – “3UR-FE Lubrication: Oil and Oil Filter: Replacement” • 2010 Tundra (1UR-FE): Engine/Hybrid System – Lubrication – “1UR-FE Lubrication: Oil and Oil Filter: Replacement” • 2009 Venza: Engine/Hybrid System – Lubrication – “1AR-FE Lubrication: Oil and Oil Filter: Replacement”

Related entry:

2003 sable oil pan replacement, 17k707 replacement, removing oil pan on 2007 pontiac g5, pollen filter change 2009 corsa design, oil pump chevy 3 1, knee bolster for 04 deville, how to replace 2002 e250 rotor, greasing the slip yoke on a tundra 2010 with a needle, fitting cambelt on z18xer, e-90 aftermarket cupholders,

2003 Saturn ION Engine Oil and Oil Filter Replacement Removal Procedure

0

Filed Under (Saturn) by admin on 18-08-2010

download
1. Raise and support the vehicle. 2. Place a drain pan under the oil drain plug. 3. Remove the oil pan drain plug. Important: DO NOT use an open end wrench on the hex on top of the oil filter cap. 4. Use a 32 mm (1 1/4 inch) socket on the hex on the top of the oil filter cap, or an oil filter wrench on the outside diameter of the oil filter cap. 5. Remove the oil filter cap with filter. 6. Remove the filter from the cap. Installation Procedure 1. Install the filter to the cap. 2. Install the oil filter cap with filter. Notice: Over torquing the oil filter cap may cause damage to the oil filter cap resulting in an oil leak. Notice: Refer to Fastener Notice in Service Precautions. Important: DO NOT use an open end wrench on the hex on top of the oil filter cap. 3. Use a 32 mm (1 1/4 inch) socket on the hex on the top of the oil filter cap, or an oil filter wrench on the outside diameter of the oil filter cap. – Tighten the oil filter cap until fully seated, DO NOT exceed 25 Nm (18 ft. lbs.). 4. Install the oil pan drain plug. – Tighten the oil pan drain plug to 25 Nm (18 ft. lbs.). 5. Lower the vehicle. 6. Fill the engine with oil

Related entry:

pp-t40, 2001 Montero sport cabin filter location, charcoal filter replacement chevrolet silverado, siememens pp-t40, t40 filter, what is a PP-T40, what size scocket for peugeot 206 oil filter cap,

2004 Honda Element EX ROCKER ARM OIL PRESSURE SWITCH (VTEC OIL PRESSURE SWITCH)

0

Filed Under (Honda) by admin on 21-12-2010

download
1. Check the engine oil level. Is the level OK? YES- Go to step 2 . NO- Adjust the engine oil to the proper level, then go to step 14 . 2. Turn the ignition switch ON (II). 3. Clear the DTC with the HDS. 4. Do the VTEC TEST in the INSPECTION MENU with the HDS. Is the result OK? YES- Intermittent failure, system is OK at this time. Check for poor connections or loose terminals at the rocker arm oil pressure switch (VTEC oil pressure switch) and the ECM/PCM. NO- Go to step 5 . 5. Check the result of step 4 . Rocker Arm Oil Pressure Switch (VTEC Oil Pressure Switch) Failure Rocker Arm Oil Pressure Switch (VTEC Oil Pressure Switch) Open Rocker Arm Oil Pressure Switch (VTEC Oil Pressure Switch) SIG Line Open Rocker Arm Oil Pressure Switch (VTEC Oil Pressure Switch) GND Line Open Is the test result any of the above? YES- Go to step 6 . NO- Check for poor connections or loose terminals at the rocker arm oil pressure switch (VTEC oil pressure switch). If it is OK, replace the rocker arm oil control solenoid (VTEC solenoid valve) (see step CMP SENSOR A REPLACEMENT ), then go to 14 . 6. Turn the ignition switch OFF. 7. Disconnect the rocker arm oil pressure switch (VTEC oil pressure switch) 2P connector. 8. Check for continuity between rocker arm oil pressure switch (VTEC oil pressure switch) 2P connector terminals No. 1 and No. 2.

Related entry:

1994 ford escort lx ignition lock pin replacement, 72 monte carlo wiring diag, ford windstar 3 8L V6 rocker arm torque spec, how to replace ignition switch on 2004 impala, 2001 accord low pressure intake, 2006 jeep liberty ignition switch repair, 2001 chevy cavalier rocker arm torque specs free manual, 2002 kia sportage ecm not sending signal to fuel pump relay, sunroof switch replacement instructions 2008 scion tc, astra switch ignition remove,