Auto Repair Manual Free Download and ReviewsFree download ebook pdf files automotive manual

download
Note: The procedure for removing and installing the Emergency flasher switch -E3- Rear window defogger switch -E15- Seat heater regulator switches (modules -J131- and -J132-) is essentially the same for all switches. Removing the emergency flasher switch -E3- is illustrated below. Removing CAUTION! Switch off all electrical consumers. Switch off ignition and remove ignition key. CAUTION! Be careful not to damage instrument panel center console trim when removing switch. Protect trim in area of switch with adhesive tape before removing switch. Do Not pry out switches from the side. Only pull out from the top. Carefully loosen and remove switch faceplate using a plastic wedge tool (locally available) or wrapped screwdriver. Using pliers, grasp switch at the top of the frame as illustrated and carefully pull switch from opening. Disconnect electrical connection. Installing Connect electrical connection. Insert switch into opening and push in to engage. Install switch faceplate. Switch blanks, removing Using a plastic wedge tool (locally available) or wrapped screwdriver, carefully pry out blank from the side as illustrated.

download
Remove the upper section of the center console. Removing pen holder and mug holder Remove the pen holder (1). If the pen holder is bonded, replace using a new pen holder and clip mounting. Remove the mug holder insert (2) by releasing the hooks on the underside of the center console. Removing the cover Move the arm of the mechanism as far back as possible. Remove: the clip with the spring (2) by the cover mechanism the 2 clips (1) securing the cover to the center console the cover (3). Replacing components Replacing the lower section of the mug holder

download
AR68.20-P-2010G Remove/Install Front Center Console Removing And Installing Front Center Console AR68.20-P-2350G Remove/Install Cover on Center Console Removing And Installing Cover On Center Console Disassembling And Reassembling Center Console
Removing And Installing Cover On Gearshift Lever Remove/Install Ashtray Housing With Stowage Compartment In Front Center
Console

download
When removing the side wall of the center console panel during service, care must be taken and proper sequence must be followed or the clips and/or hooks on the side wall may break requiring replacement of the side wall. For proper removal of the sidewall, please refer to the following procedure. REPAIR PROCEDURE When removing the side wall(s) of the center console during servicing, care must be taken and the proper pro- cedure must be followed or the clips and/or hooks on the side wall(s) may be broken, requiring unnecessary replacement of the side wall(s). CAUTION: 1. Using a plastic windshield setting tool or equivalent insert between side wall and center panel, then carefully pry rearward (toward rear of vehicle) to disengage clips and hooks. • DO NOT forcibly pull the side wall outward (to the side), to prevent damage. NOTE: • Plastic Windshield Setting Tool (Part Number IS742 – available from Equalizer at 800-334-1334) or similar available through a local supplier. If a flat-tipped screwdriver is to be used, wrap the tip in tape to prevent damage to the center console or the shift panel. • PLASTIC WINDSHIELD SETTING TOOL 1501a 2. Carefully pull the side wall rearward to disengage pins “C” and remove. 3. To install, place pins “C” in place and slide forward (toward front of vehicle) until clips “A”, “B” and hook “D” engage.

download
Special Tools Required KTC trim tool set SOJATP2014 Without Console Armrest NOTE: Use the appropriate tool from the KTC trim tool set to avoid damage when prying components. Take care not to scratch the front seat, dashboard, and related parts. 1. Detach the clips (A, B) by pulling the center console box (C) up, and removing it from the center console (D). 2. M/T model: Remove the shift knob (A). 3. Remove the screws (A, B) and clips (C), and remove the center console (D). 4. Install the console in the reverse order of removal, and note these items: Replace any damaged clips. Push the clips into place securely. With Console Armrest NOTE: Use the appropriate tool from the KTC trim tool set to avoid damage when prying components. Take care not to scratch the front seat, dashboard, and related parts. 1. M/T model: Remove the shift knob (A).