Filed Under (Dodge) by admin on 21-09-2010
Tags: 2000 dodge intrepid,
camshaft,
camshafts,
chain tensioner,
cylinder head,
cylinder heads,
dodge intrepid,
oil pump,
oil pump housing,
piston damage,
right cylinder,
timing chain cover,
upper intake manifold
download
1. Remove upper intake manifold. 2. Remove cylinder head covers, crankshaft damper, and timing chain cover. CAUTION: When aligning timing marks, always rotate engine by turning the crankshaft. Failure to do so will result in valve and/or piston damage. Fig. 70 3. Align crankshaft sprocket timing mark to mark on oil pump housing (Fig. 70). The mark on oil pump housing is 60° ATDC of #1 cylinder. CAUTION: When the timing chain is removed and the cylinder heads are still installed, DO NOT rotate the camshafts or crankshaft without first locating the proper crankshaft position. Failure to do so will result in valve and/or piston damage. 2000 Dodge Intrepid V6-2.7L VIN R Fig. 74 4. Remove primary timing chain tensioner from right cylinder head (Fig. 74). 5. Remove camshaft position sensor from left cylinder head (Fig. 69).
Filed Under (Jeep) by admin on 22-04-2010
download
REMOVE THE NEGATIVE BATTERY CABLE BEFORE INSTALLING THE CRUISE CONTROL COMPONENTS FOR SAFETY PRECAUTIONS.
FIGURE 1. 2. JEEP WRANGLER APPLICATIONS: REMOVE AIRBAG BY USING ( TRIM TOOL TO RELEASE METAL CLIPS AS SHOWN IN FIGURE 2. CAUTION: ENSURE THAT BATTERY HAS BEEN 90 SECONDS DISCONNECTED FOR MORE THAN PRIOR TO REMOVAL OF AIRBAG; FAILURE TO HEED THIS WARNING MAY RESULT IN AIRBAG DISCHARGE AND MAY CAUSE SERIOUS INJURY OR DEATH. 3. DODGE CALIBER, JEEP COMPASS/PATRIOT APPLICATIONS: REMOVE AIRBAG BY EXTRACTING THE (2) 10MM SCREWS AS ILLUSTRATED IN FIGURE 2A. 4. PRESS IN SIDES OF BOTH CONNECTORS TO REMOVE AIRBAG FIGURE 3. AS ILLUSTRATED IN CAUTION: BE AIRBAG SURE TO STORE FACE UP AS FIGURE 3A ILLUSTRATED IN TO REDUCE INJURY IN EVENT OF ACCIDENTAL DISCHARGE OF AIRBAG.
5. JEEP WRANGLER REMOVE 13MM BOLT TO TAKE OFF STEERING WHEEL, THEN SKIP ON PAGE 6. DODGE CALIBER, JEEP COMPASS/PATRIOT APPLICATIONS: REMOVE (3) TORX 25 SCREWS TO RELEASE CENTER BRACKET INSIDE STEERING WHEEL. FIGURE 4
Filed Under (Dodge) by admin on 28-09-2009
repair and maintenance manual covers Dodge Omni, Miser, 024, Charger 2.2, and Plymouth Horizon, Miser, TC3, TC3 Tourismo, and Rampage, 1978-1989, US and Canadian models.
What’s Inside? * General information and maintenance * Tune-up and performance maintenance * Engine and engine rebuilding * Emission controls and fuel system * Chassis electrical * Clutch and transmission * Drive train * Suspension and steering * Brakes * Troubleshooting * Mechanic’s data.
Filed Under (Dodge) by admin on 28-09-2009
workshop manual covers Dodge Omni and Plymouth Horizon, plus Charger, Charger 2.2, Turismo, Turismo 2.2, Turismo Duster, America, 024, TC3, GLH, and Shelby Charger models, 1978 through 1990. Note: this manual does not include 1.6L engine information.
Table of Contents
Introduction: Vehicle identification numbers; Buying parts; Maintenance techniques, and more. Tune-up and routine maintenance; Engine and overhaul procedures; Cooling, heating and air-conditioning systems; Fuel and exhaust systems; Engine electrical systems; Emissions control systems; Transmission; Brakes; Suspension and steering systems; Body; Chassis electrical system; Wiring diagrams.
Filed Under (Dodge) by admin on 28-09-2009
workshop manual covers Dodge Challenger and Plymouth Sapporo with 1600 cc (1.6 liter), 2000 cc (2 liter), and 2600 cc (2.6 liter) engines, and manual 5-speed or automatic transmissions, 1978 thru 1983.
