Filed Under (BMW) by admin on 07-09-2009
Comprehensive, single source of service information and specifications available specifically for BMW 5 Series from 1997 to 2002. The aim throughout this manual has been simplicity, clarity and completeness, with practical explanations, step-by-step procedures and accurate specifications. Whether you are a professional or a do-it-yourself BMW owner, this manual will help you understand, care for and repair your E39 5 Series. Though the do-it-yourself BMW owner will find this manual indispensable as a source of detailed maintenance and repair information, the BMW owner who has no intention of working on his or her car will find that reading and owning this manual will make it possible to discuss repairs more intelligently with a professional technician.
Engines covered in this BMW repair manual:
* 6-cylinder engines: M52, M52 TU, M54
* V-8 engines: M62, M62 TU
Fuel injection systems covered in this BMW repair manual:
* Bosch M 5.2, M 5.2.1, ME 7.2
* Siemens MS 41.0, MS 42.0, MS 43.0
Manual transmissions covered in this BMW repair manual:
* Getrag S5D 250G, S6S 420G
* ZF S5D 320Z
Automatic transmissions covered in this BMW repair manual:
* A4S 270R, A4S 310R
* A5S 360R, A5S 390R
* A5S 325Z
*A5S 560Z, A5S 440Z
Filed Under (BMW) by admin on 07-09-2009
repair manual supersedes our 1996 through 1998 BMW Z3 repair manual with four more model years of coverage and repair information for the Z3 Roadster, Z3 Coupe, M Roadster and M Coupe. With extensive new information as well as revisions throughout, this book is the comprehensive source of service information and technical specifications available for the BMW Z3 Roadster and Coupe.
Read the rest of this entry »
Filed Under (Mitsubishi) by admin on 07-06-2010
Valve timing procedures Valve timing procedures Ensure crankshaft at TDC on No.1 cylinder. Ensure crankshaft pulley timing mark aligned with 0° timing mark on chain cover . Ensure notch on camshaft points upwards . If notch not visible, turn crankshaft one more turn. Install timing gears as follows: Ensure crankshaft gear and intermediate shaft gear timing marks aligned . Install LH balancer shaft . Ensure timing marks on intermediate shaft gears and LH balancer shaft gear aligned  & . Ensure RH balancer shaft gear and oil pump gear timing marks aligned . Install oil pump housing complete with RH balancer shaft. Ensure timing marks on oil pump gear and crankshaft gear aligned . Install injection pump as follows  : Ensure notch on injection pump gear aligned with mark ‘T’ on flange . During installation of injection pump: Notch on gear moves in direction of arrow. Install timing chain as follows:
Filed Under (Jeep) by admin on 17-08-2010
Housing Assembly HVAC: Service and Repair The heater-A/C housing assembly must be removed from the vehicle and the two halves of the housing separated for service access of the heater core, evaporator coil, blend-air door(s), and each of the various mode control doors. WARNING: ON VEHICLES EQUIPPED WITH AIRBAGS, REFER TO AIR BAGS AND SEAT BELTS/AIR BAGS BEFORE ATTEMPTING ANY STEERING WHEEL, STEERING COLUMN, OR INSTRUMENT PANEL COMPONENT DIAGNOSIS OR SERVICE. FAILURE TO TAKE THE PROPER PRECAUTIONS COULD RESULT IN ACCIDENTAL AIRBAG DEPLOYMENT AND POSSIBLE PERSONAL INJURY. REMOVAL 1. Disconnect and isolate the battery negative cable. 2. Remove the instrument panel from the vehicle. Refer to: Body and Frame, Interior Trim, Dashboard/Instrument Panel, Service and Repair, Instrument Panel Service Procedures, Instrument Panel Assembly Replacement, See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Instrument Panel Service Procedures/Instrument Panel Assembly Replacement 3. Recover the refrigerant from the refrigerant system. See: Refrigerant/Service and Repair 4. Disconnect the liquid line refrigerant line from the evaporator inlet tube See: Hose/Line HVAC/Service and Repair. Install plugs in, or tape over all of the opened refrigerant line fittings. 5. Disconnect the suction line refrigerant line from the evaporator outlet tube See: Hose/Line HVAC/Service and Repair. Install plugs in, or tape over all of the opened refrigerant line fittings. 6. Disconnect the heater hoses from the heater core tubes. Clamp off the heater hoses to prevent loss of coolant. Install plugs in, or tape over the opened heater core tubes. 7. If the vehicle is equipped with the manual temperature control system, unplug the heater-A/C system vacuum supply line connector from the tee fitting near the heater core tubes. 8. Remove the coolant reserve/overflow bottle from the passenger side inner fender shield. 9. Remove the Powertrain Control Module (PCM) from the passenger side dash panel in the engine compartment and set it aside. Do not unplug the PCM wire harness connectors.
Filed Under (BMW) by admin on 06-09-2009
BMW Factory Service Repair Technical Information System (TIS) Workshop Manual Program
all-inclusive BMW Factory Repair & Service Workshop TIS Manual Program on CD. Includes Cars and Trucks from model years 1982 – 2004 (see below for extensive list of models).
This program contains step-by-step instructions for almost all service, maintenance, and repair jobs. Learn how to perform all the works using the DEALERSHIP’S directions. This proves great for general maintenance or for even bigger projects. Search by symptoms down to specific issues. This set streamlines the diagnosis and repair process. The extremely detailed information on this disc includes Complete Repair Manuals, Service Information Bulletins, Technical Reference Bulletins, Technical Data, Tightening Torque Data, Parts Information Bulletins, Special Tools Bulletins, and Symptom and Graphics Paths for Troubleshooting Problems.