fuse diagram for 1990 camaro
You are searching repair manual in PDF format about fuse diagram for 1990 camaro use another keyword for search another post or files
Filed Under (Plymouth) by admin on 13-05-2010
Check horn fuse 6 in the Power Distribution Center and fuse 7 in the Junction Block. If fuse is blown refer to FUSE BLOWN. If fuse is OK, refer to FUSE OK. Fuse Blown 1. Verify condition of battery terminals and voltage, refer to Battery If battery connections and battery charge is OK proceed to Step 2. . Using a voltmeter, test for battery voltage at both sides of horn fuse 7. If voltage is
OK, on both sides of fuse, proceed to Fuse OK. If voltage is OK, on one side of fuse, the fuse is blown, proceed to Step 3. 3. Using a suitable ammeter in place of the fuse, test amperage draw of the horn circuit. If amperage draw is greater than 20 amps without the horn switch depressed, a grounded circuit exists between the fuse and the horn relay Proceed to Step 4. If amperage draw is greater than 20 amps with the horn switch depressed, a grounded circuit exists between the horn relay and the horn. Proceed to step Step 5. 4. Remove the horn relay from the Junction Block. If the amperage draw drops to 0 amps , the horn switch or circuit is shorted. If the amperage draw does not drop to 0 amps , repair short at the Junction Block.
Filed Under (Honda) by admin on 16-11-2010
The fuse box is located under dashboard on driver’s side. Underhood fuse panel is located in engine compartment beside battery. Cars equipped with anti-lock brake system have a third fuse box for ABS in front of the engine compartment on passenger’s side. FUSE PANEL IDENTIFICATION (1988-91) Fuse & Circuit Breaker Identification 1 – 10 Amp Integrated Control Unit, Combination Switch, Gauge Assembly, Back-Up Lights Switch, Shift Position Console Switch, Clock (1990), Shift Lock Solenoid (1990), Interlock Control Unit (1990), Automatic Seat Belts (If Equipped) 2 – 10 Amp Starter Solenoid, PGM-FI Main Relay, PGM-FI Electronic Control Unit, Integrated Control Unit 3 – 20 Amp Power Door Locks (If Equipped) 4 – 10 Amp Right Headlight High Beam, High Beam Indicator Light, Daytime Running Lights Relay (Canada) 5 – 10 Amp Left Headlight High Beam 6 – 30 Amp Sun Roof Motor (If Equipped) 7 – 10 Amp Rear Lights (Canada Only) 8 – 10 Amp Integrated Control Unit, Interior & Exterior Lighting 9 – Blank
Filed Under (Mercedes-Benz) by admin on 10-05-2010
The fuse/relay box is located in the left side of the engine compartment. Relay and Control Unit Locations Fuse Box and Fuse Location (Fuses 1 – 4) Fuse Box and Fuse Location (Fuses G, H, F10, F15, F22, F22/1,
F22/2) Fuse Box and Fuse Location (Fuses F24 & F24/1)
Filed Under (Infiniti) by admin on 18-05-2010
Electrical components are protected against shorts by fuses. Main fuse box is located in left kick panel next to park brake pedal. Fuse application information is located on fuse box cover. An underhood fuse and fusible link box is located next to battery. Relay boxes are located next to battery and on right side of engine compartment.
UNDERDASH FUSE PANEL FUSE & CIRCUIT BREAKER IDENTIFICATION
Filed Under (Jaguar) by admin on 22-12-2010
To remove the heelboard relay and fuse box trim panels, turn the fastener 90 degrees and pull the trim panel forwards. See Fig. 7 . When reinstalling heelboard relay and fuse box trim panels, insert the top of the trim panel under the rear seat pan and push the bottom of the trim panel until it is fully seated. Insert the fastener and turn 90 degrees to secure the trim panel. For left heelboard relay and fuse box fuse identification, see Fig. 8 . For right heelboard relay and fuse box fuse identification, see Fig. 9 .