how to change thermostat in 2005 envoy


You are searching repair manual in PDF format about how to change thermostat in 2005 envoy use another keyword for search another post or files




FORD: 2001-2005 Taurus 2001-2006 Escape MERCURY: 2001-2005 Sable 2005-2006 Mariner

0

Filed Under (Ford) by admin on 27-04-2010

download
ISSUE Some 2001-2005 Taurus/Sable, 2001-2006 Escape and 2005-2006 Mariner vehicles built prior to
1-17-2006 equipped with the 3.0L 4V Duratec engine may exhibit a ticking noise from the left bank cylinder head, with the engine at normal operating temperature only.
ACTION To diagnose, with the engine running and warm (normal operation temperature), using a mechanic’s stethoscope determine if the ticking noise is coming from the left hand intake camshaft at cylinder number 6, (Figure 1). If the ticking noise can be verified, refer to the following Service Procedure.

2007 Chevrolet Silverado Early Oil Change Message Or Erratic Oil Life Monitor

0

Filed Under (Chevrolet) by admin on 21-04-2011

download
This PI was superseded to advise dealers there is no repair for early oil change messages or erratic OlM operation. Please discard PIP4540B. The following diagnosis might be helpful if the vehicle exhibits the symptom(s) described in this PI. Condition I Concern: A dealer may encounter a customer concern of the oil life monitor (OlM) percentage dropping too qUickly, or an early oil change message. A customer utilizing the oil life monitor may be directed to change the oil at (or near) 1000 mile intervals. Recommendation Ilnstructions: Please do not replace the IPC or ECM for an early oil change message. Oil life monitoring is dependent on vehicle use. Oil life monitoring and change intervals will differ depending on how the vehicle is driven. Please complete the current SI diagnostics for any trouble code or symptom found. Engine drivability concerns may induce early oil change messages or erratic OlM operation. Dealers should verify there are no intake or exhaust leaks by completing Charge Air Cooler Diagnosis (Full System Air leak Test and the Induction System Smoke Test). Discuss driving habits with the customer. The main contributor to early or erratic oil change messages may be some of the customers driving habits. Drive cycles that include short trip, stop and go, and extended idle times are a few of the contributors to early oil change messages. Customers with more exhaust regenerations (due to driving habits) are more susceptible to qUicker oil change messages. There is no repair for early oil change messages or erratic OlM operation. If a dealer is to encounter a vehicle with a customer concern of early oil change complete a Field Product Report using the newest version of bulletin 02-00-89-002. Note: If an oil analysis has been completed fuel dilution should not be over 12%.

2005 Ford Escape Hybrid SAFETY BELT RETRACTION SPEED

0

Filed Under (Ford) by admin on 07-09-2010

download
FORD: 2000-2004 Mustang 2000-2005 Crown Victoria, Taurus 2000-2003 Explorer Sport, Windstar 2000-2004 Ranger 2000-2005 E-Series, Excursion, Expedition, Explorer, F-150, F-Super Duty 2001-2005 Escape, Explorer Sport Trac 2004-2005 Freestar 2005 Escape Hybrid 2004-2005 F-650, F-750 LINCOLN: 2000-2002 Continental 2000-2005 LS, Town Car, Navigator 2003-2005 Aviator MERCURY: 2000-2005 Grand Marquis, Sable, Mountaineer 2004-2005 Monterey 2005 Mariner ISSUE A service kit is now available to improve safety belt retraction speed. ACTION See the part application chart and select the appropriate kit. Follow the Instruction Sheet included in the kit. Refer to Workshop Manual Section 501-20a for additional information. NOTE IF TEFLON TAPE IS ALREADY PRESENT ON THE SAFETY BELT GUIDE RING (D-RING), DO NOT CONTINUE WITH THIS TSB. NOTE EACH KIT SERVICES TWO (2) BELTS. NOTE DOES NOT APPLY TO AVIATOR/EXPLORER 4DR/MOUNTAINEER FRONT SAFETY BELTS FOR VEHICLES BUILT AFTER 6/25/2004, OR REAR SAFETY BELTS FOR VEHICLES BUILT AFTER 10/22/2004, BECAUSE TEFLON TAPE IS INSTALLED DURING PRODUCTION.

2003 Chevrolet Trailblazer DTC P0128

0

Filed Under (Chevrolet) by admin on 18-01-2011

download
Tests/Procedures: Potential Causes: Tech Tips: Diagnostic Codes: 1. Replace the thermostat and test drive to see if the code returns. Thermostat This code indicates the engine has not reached a set temperature based on engine run time. P0128 Reported Fix Details 2003 Chevrolet Trailblazer, 4.2L * Replaced Engine Thermostat – We replaced thermostat (with housing) and refilled system with fresh coolant. Cleared code and test drove. now vehicle comes up to operating temp as it should. 2003 Chevrolet Trailblazer, 4.2L * Thermostat – Replaced the t-stat and alol is fine. Did notice that ect at cruise warm is around 210F . Seems high , will watch on other vehicles. 2005 Chevrolet Trailblazer, LS 4.2L * Replaced Engine Thermostat – replaced thermostat NOTE: it is on the side of the engine at the lower radiator hose 2005 Buick Rainier, 4.2L, Vin S, Eng Cfg L6, USA/Canada * Thermostat – DTC P0128, Engine not reaching operating temperature, Replaced thermostat, retest OK Confirmed Fix Engine Thermostat Engine Thermostat Engine Thermostat Engine Thermostat

MERCURY: 2002-2005 Grand Marquis LIMITED SLIP AXLE CHATTER, SHUDDER, BINDING SENSATION, OR VIBRATION DURING LOW SPEED TURNING MANEUVERS

0

Filed Under (Mercury) by admin on 07-09-2010

download
FORD: LINCOLN: 2002-2005 Crown Victoria, Mustang, Explorer 2002-2005 Town Car 2003-2005 Expedition 2003-2005 Navigator 2004-2005 F-150 MERCURY: 2002-2005 Grand Marquis, Mountaineer This article supersedes TSB 04-17-5 to update the model year and vehicle line coverage. ISSUE Some 2003-2005 Expedition/Navigator, 2004-2005 F-150 vehicles equipped with a 9.75? or 8.8? limited slip rear axle, and 2002-2005 Explorer 4dr, Mountaineer, Crown Victoria, Grand Marquis, Town Car, and Mustang vehicles equipped with 8.8? limited slip rear axle, may exhibit a chatter, shudder, a binding sensation, or a vibration during low speed turns. On 4×4 vehicles, the sensation may appear to be originating from the front axle or the steering gear. ACTION First verify the condition. On 4×4 trucks ensure that the vehicle is in 2WD, to isolate the rear axle. On all vehicles, turn the wheel fully right (or fully left) and then accelerate the vehicle. If the condition is verified to be in the rear axle, replace the limited slip clutch pack. SERVICE PROCEDURE