how to fix leak on oil cooler vw lt 35


You are searching repair manual in PDF format about how to fix leak on oil cooler vw lt 35 use another keyword for search another post or files



  how to fix leak on oil cooler vw lt 35 Direct Download speed 5787 Kb/s

  how to fix leak on oil cooler vw lt 35 Full Version speed 6767 Kb/s




2006 – 2007 Toyota vehicles SHOCK ABSORBER REPLACEMENT CRITERIA

0

Filed Under (Uncategorized) by admin on 13-10-2010

download
CONDITION Slight oil seepage from oil seal case Moderate oil seepage from oil seal case ACTION Normal oil evaporation — NOT necessary to replace the shock absorber Normal oil evaporation — NOT necessary to replace the shock absorber Oil leak/drip on the seal case, extending below the spring seat Abnormal oil leak — Replace the shock absorber Oil leak, covering top, spring seat, and part of strut body Abnormal oil leak — Replace the shock absorber Oil leak, covering entire strut body, spring seat, and knuckle bracket Abnormal oil leak — Replace the shock absorber CONDITION Slight oil seepage from oil seal case Moderate oil seepage from oil seal case ACTION Normal oil evaporation — NOT necessary to replace the shock absorber Normal oil evaporation — NOT necessary to replace the shock absorber Oil leak/drip on the seal case, extending below the spring seat Abnormal oil leak — Replace the shock absorber Oil leak, covering top, spring seat, and part of shock body Abnormal oil leak — Replace the shock absorber Oil leak, covering entire shock body and spring seat, and extending to lower bushing Abnormal oil leak — Replace the shock absorber

Related entry:

chevrolet lacetti oil leak, how to replace the oil pan on a 2008 HHR 2 4L, 2010 toyota highlander Oil control valve, price for oil control valve 2010 toyota highlander, how replace rear absorber shock yaris 2007, how to replace front bearing on 1995 camry using special tool, How to remove 206 rear shocks, how to remove an oil cooler on a chrysler 300m, how to replace front shock on ford ka, how to replace rear shock absorbers on a chevy van g-20,

2003 Buick Century Engine Oil and Oil Filter Replacement Removal Procedure

0

Filed Under (Buick) by admin on 15-12-2010

download
1. 2. 3. 4. 5. Raise and support the vehicle. Refer to Vehicle Lifting. Position the oil drain pan under the engine oil drain plug. Remove the engine oil drain plug. Clean and inspect the engine oil drain plug, repair or replace if necessary. Clean and inspect the engine oil drain plug sealing surface on the oil pan, repair or replace oil pan if necessary. 6. Remove the oil filter. 7. Clean and inspect the oil filter sealing area on the engine block, repair or replace if necessary. Installation Procedure 1. Lightly oil the replacement oil filter gasket with clean oil and install the new oil filter. Notice: Refer to Fastener Notice in Service Precautions. 2. Install the new oil filter. Tighten the new oil filter to 3/4 to 1 full turn, after the oil filter gasket contacts the oil filter mounting surface. 3. Install the engine oil drain plug. Tighten the plug to 30 Nm (22 ft. lbs.) . 4. 5. 6. 7. 8. 9. Remove the oil drain pan. Lower the vehicle. Fill the engine with new engine oil. Start the engine. Inspect for oil leaks after engine start up. Turn off the engine and allow the oil a few minutes to drain back into the oil pan. Remove the oil level indicator from the oil level indicator tube. Clean off the indicator end of the oil level indicator with a clean paper towel or cloth. Install the oil level indicator into the oil level indicator tube until the oil level indicator handle contacts the top of the oil level indicator tube. Again, remove the oil level indicator from the oil level indicator tube keeping the tip of the oil level indicator down. Check the level of the engine oil on the oil level indicator. If necessary, adjust the oil level by adding or draining the engine oil. 10. 11. 12. 13. 14. 15.

Related entry:

5 3 oil level sensor, auto air compressor oil capacity chart, ford escape 2009 engine oil drain plug?, gmc acadia ac drain, replacing oil filter on a chevy II 307, compressor drain tube gmc acadia, Sanden Compressor Oil Capacity, 2006 tbss oil pan removal, 2006 oil pan for trailblazers, 2006 kia sorento ac oil cappacities,

Oil Filter Cap Assembly Precautions

0

Filed Under (Toyota) by admin on 20-05-2011

download
To prevent damage to the oil ?lter cap assembly, this procedure must be closely followed during oil ?lter replacement to avoid immediate and future oil ?lter serviceability concerns. The following engines are equipped with a plastic oil ?lter cap assembly: • 1UR-FE (Tundra, Sequoia) • 3UR-FE (Tundra, Sequoia, Land Cruiser) • 2ZR-FE (Corolla, Matrix) • 1AR-FE (Highlander, Venza) • 2AR-FE (RAV4, Camry) Repair Procedure NOTICE During oil ?lter replacement: • Ensure that SST 09228-06500-02 or 09228-06501 is used to remove and install the oil ?lter cap — or damage to the cap may occur. • Inspect the SST for any damage or distortion before use. • Con?rm that the SST is fully seated on the oil ?lter cap when removing/installing (see Figure 1). Figure 1. 1 3 4 1 2 3 4 • Ensure a torque wrench is used for oil ?lter cap installation. Torque: 25 +/- 5 N*m (255 +/- 51 kgf*cm, 18 +/- 3.7 ft*lbf) • There is a possibility the oil ?lter cap will be dif?cult to remove if the torque range is exceeded. FAILURE TO FOLLOW THE INSTRUCTIONS ABOVE MAY RESULT IN OIL FILTER CAP AND/OR SST DAMAGE. With Drain Plug Without Drain Plug Oil Filter Cap SST (09228-06500-02 or 09228-06501) Refer to the Technical Information System (TIS) when replacing the oil ?lter, applicable model and model year Repair Manual: • 2010 Camry: Engine/Hybrid System – Lubrication – “2AR-FE Lubrication: Oil and Oil Filter: Replacement” • 2009 / 2010 Corolla: Engine/Hybrid System – Lubrication – “2ZR-FE Lubrication: Oil and Oil Filter: Replacement” • 2009 Highlander: Engine/Hybrid System – Lubrication – “1AR-FE Lubrication: Oil and Oil Filter: Replacement” • 2008 / 2009 Land Cruiser: Engine/Hybrid System – Lubrication – “3UR-FE Lubrication: Oil and Oil Filter: Replacement” • 2009 / 2010 Matrix: Engine/Hybrid System – Lubrication – “2ZR-FE Lubrication: Oil and Oil Filter: Replacement” • 2009 RAV4: Engine/Hybrid System – Lubrication – “2AR-FE Lubrication: Oil and Oil Filter: Replacement” • 2008 / 2009 / 2010 Sequoia (3UR-FE): Engine/Hybrid System – Lubrication – “3UR-FE Lubrication: Oil and Oil Filter: Replacement” • 2010 Sequoia (1UR-FE): Engine/Hybrid System – Lubrication – “1UR-FE Lubrication: Oil and Oil Filter: Replacement” • 2007 / 2008 / 2009 / 2010 Tundra (3UR-FE): Engine/Hybrid System – Lubrication – “3UR-FE Lubrication: Oil and Oil Filter: Replacement” • 2010 Tundra (1UR-FE): Engine/Hybrid System – Lubrication – “1UR-FE Lubrication: Oil and Oil Filter: Replacement” • 2009 Venza: Engine/Hybrid System – Lubrication – “1AR-FE Lubrication: Oil and Oil Filter: Replacement”

Related entry:

6 0 oil cooler replacement instructions, 2002 e250 brake pad removal, replacement display units for peugoet 407, remove cabin filter pajero mini, oil pump chevy 3 1, location of grease tips on Toyota tundra 05, greasing the slip yoke on a tundra 2010 with a needle, fitting cambelt on z18xer, 2008 lexus engine 2gr-fe chirping squeak noise sb0010-09, subaru turbo replacement,

2003 Saturn ION Engine Oil and Oil Filter Replacement Removal Procedure

0

Filed Under (Saturn) by admin on 18-08-2010

download
1. Raise and support the vehicle. 2. Place a drain pan under the oil drain plug. 3. Remove the oil pan drain plug. Important: DO NOT use an open end wrench on the hex on top of the oil filter cap. 4. Use a 32 mm (1 1/4 inch) socket on the hex on the top of the oil filter cap, or an oil filter wrench on the outside diameter of the oil filter cap. 5. Remove the oil filter cap with filter. 6. Remove the filter from the cap. Installation Procedure 1. Install the filter to the cap. 2. Install the oil filter cap with filter. Notice: Over torquing the oil filter cap may cause damage to the oil filter cap resulting in an oil leak. Notice: Refer to Fastener Notice in Service Precautions. Important: DO NOT use an open end wrench on the hex on top of the oil filter cap. 3. Use a 32 mm (1 1/4 inch) socket on the hex on the top of the oil filter cap, or an oil filter wrench on the outside diameter of the oil filter cap. – Tighten the oil filter cap until fully seated, DO NOT exceed 25 Nm (18 ft. lbs.). 4. Install the oil pan drain plug. – Tighten the oil pan drain plug to 25 Nm (18 ft. lbs.). 5. Lower the vehicle. 6. Fill the engine with oil

Related entry:

pp-t40, siememens pp-t40, t40 filter, what is a PP-T40, what size scocket for peugeot 206 oil filter cap,

2004 Honda Element EX ROCKER ARM OIL PRESSURE SWITCH (VTEC OIL PRESSURE SWITCH)

0

Filed Under (Honda) by admin on 21-12-2010

download
1. Check the engine oil level. Is the level OK? YES- Go to step 2 . NO- Adjust the engine oil to the proper level, then go to step 14 . 2. Turn the ignition switch ON (II). 3. Clear the DTC with the HDS. 4. Do the VTEC TEST in the INSPECTION MENU with the HDS. Is the result OK? YES- Intermittent failure, system is OK at this time. Check for poor connections or loose terminals at the rocker arm oil pressure switch (VTEC oil pressure switch) and the ECM/PCM. NO- Go to step 5 . 5. Check the result of step 4 . Rocker Arm Oil Pressure Switch (VTEC Oil Pressure Switch) Failure Rocker Arm Oil Pressure Switch (VTEC Oil Pressure Switch) Open Rocker Arm Oil Pressure Switch (VTEC Oil Pressure Switch) SIG Line Open Rocker Arm Oil Pressure Switch (VTEC Oil Pressure Switch) GND Line Open Is the test result any of the above? YES- Go to step 6 . NO- Check for poor connections or loose terminals at the rocker arm oil pressure switch (VTEC oil pressure switch). If it is OK, replace the rocker arm oil control solenoid (VTEC solenoid valve) (see step CMP SENSOR A REPLACEMENT ), then go to 14 . 6. Turn the ignition switch OFF. 7. Disconnect the rocker arm oil pressure switch (VTEC oil pressure switch) 2P connector. 8. Check for continuity between rocker arm oil pressure switch (VTEC oil pressure switch) 2P connector terminals No. 1 and No. 2.

Related entry:

air solenoid valve on international 8600 not working properly, 2001 accord low pressure intake, 72 monte carlo wiring diag, where is the oil pressure relief valve situated on ford mondeo 2002, peugeot 307 gearbox oil pressure regulation, oil pressure light 2004 suburban, how do you bypass 2004 jaguar xj8 security system, repair stering lock 1993 eurovan, replace ignition switch 2007 jeep liberty, KIA RIO 2008 BLOWER SWITCH REMOVE,