is200 radiator


You are searching repair manual in PDF format about is200 radiator use another keyword for search another post or files



  is200 radiator Direct Download speed 5787 Kb/s

  is200 radiator Full Version speed 6767 Kb/s




2003 Ford Explorer Radiator Cooling Fan and Shroud Removal

0

Filed Under (Ford) by admin on 18-02-2011

download
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Section 100-00. 2. If servicing the radiator lower fan shroud or the radiator, drain the cooling system. For additional information, refer to Cooling System Draining, Filling and Bleeding in this section. 3. Remove the parts in the order indicated in the following illustrations and tables. To remove individual parts, only carry out the listed steps: 4. To install, reverse the removal procedure. If servicing the radiator lower fan shroud or the radiator, fill and bleed the cooling system. For additional information, refer to Cooling System Draining, Filling and Bleeding in this section. Item 9: Lower Degas Bottle Hose Removal Note 1. Remove the lower degas bottle hose from the clip on the radiator lower fan shroud. Item 10: A/C Tube Removal Note 1. On 4.6L engines, detach the A/C tube from the retainers. Item 11: Transmission Cooler and A/C Tubes Removal Note 1. Disconnect the transmission cooler tubes. Remove the safety retainers from the transmission cooler tubes. Using the special tool, disconnect the quick coupler. If equipped, loosen and remove the screw clamp from the hose. 2. Remove the A/C tube brackets from the engine front cover. Item 12: Radiator Fan Shroud Screw Removal Note 1. Not all vehicles will have these radiator fan shroud screws. If vehicle is equipped with these screws, please discard them. Item 15: Cooling Fan Removal Note 1. CAUTION: Cardboard must be placed against the radiator when removing the cooling fan. Failure to follow these procedures can result in damage to the vehicle. Place a piece of cardboard against the radiator to prevent damage while removing the cooling fan. 2. Using the special tools, remove the fan blade and the clutch assembly. Item 17: Radiator Lower Fan Shroud Removal Note 1. Remove the power steering tube from the clip on the radiator lower fan shroud. Item 19: Radiator Bracket Bolt Removal Note 1. If necessary, remove the radiator brackets. Item 21: A/C Condenser Support Bracket Bolt Removal Note 1. If necessary, remove the condenser brackets. Item 22: Radiator Removal Note 1. NOTE: It will be necessary to lift the radiator assembly up off the mounts and set it on the frame in order to separate the A/C condenser from the radiator. NOTE: RH side shown, LH side similar. Remove the radiator up off the mounts and set it on the frame. 2. Remove the left inner air deflector from the A/C condenser.

Related entry:

toyota rav 4 radiator support, algo-charter_if, 2009 dODGE journey REMOVING RADIATOR, pic of a radiator support bracket for 2004 explorer, raditor relay switch location on 2004 impala, radiator drain 2005 freelander, diagram FOR 1998 Chevy Venture Radiator Cooling Fan Assembly, how to diassemble dash on 2010 challinger, troubleshooting mazda 3 radiator fan faild, 2010 chevy cobalt radiator removal,

2004 Ford Explorer Radiator Cooling Fan and Shroud Removal

0

Filed Under (Ford) by admin on 22-02-2011

download
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Section 100-00. 2. If servicing the radiator, drain the cooling system. For additional information, refer to Cooling System Draining, Filling and Bleeding in this section. 3. Remove the parts in the order indicated in the following illustrations and tables. 4. To install, reverse the removal procedure. If servicing the radiator, fill the cooling system. For additional information, refer to Cooling System Draining, Filling and Bleeding in this section. Item 9: Lower Degas Bottle Hose Removal Note 1. Remove the lower degas bottle hose from the clip on the radiator lower fan shroud. Item 10: A/C Tube Removal Note 1. On 4.6L engines, detach the A/C tube from the retainers. Item 11: Transmission Cooler and A/C Tubes Removal Note 1. Disconnect the transmission cooler tubes. Remove the safety retainers from the transmission cooler tubes. Using the special tool, disconnect the quick coupler. If equipped, loosen and remove the screw clamp from the hose. 2. Remove the A/C tube brackets from the engine front cover. Item 12: Radiator Fan Shroud Screw Removal Note 1. Not all vehicles will have these radiator fan shroud screws. If vehicle is equipped with these screws, please discard them. Item 15: Cooling Fan Removal Note 1. CAUTION: Cardboard must be placed against the radiator when removing the cooling fan. Failure to follow these procedures can result in damage to the vehicle. Place a piece of cardboard against the radiator to prevent damage while removing the cooling fan. 2. Using the special tools, remove the fan blade and the clutch assembly. Item 17: Radiator Lower Fan Shroud Removal Note 1. Remove the power steering tube from the clip on the radiator lower fan shroud. Item 19: Radiator Bracket Bolt Removal Note 1. If necessary, remove the radiator brackets. Item 21: A/C Condenser Support Bracket Bolt Removal Note 1. If necessary, remove the condenser brackets. Item 22: Radiator Removal Note 1. NOTE: It will be necessary to lift the radiator assembly up off the mounts and set it on the frame in order to separate the A/C condenser from the radiator. NOTE: RH side shown, LH side similar. Remove the radiator up off the mounts and set it on the frame. 2. Remove the left inner air deflector from the A/C condenser. 3. Remove the right inner air deflector from the A/C condenser.

Related entry:

1998 chevy 1500 pickup dash remmovle, how to remove the dash in a 1998 chevy c1500, 2006 ebcm rmoval and installation manual, diagram of dash components for 1998 chevy c1500, how to change the condenser on lincoln ls, how to remove Traverse glove box, how to replace radiator for a 2004 chevrolet trailblazer video, replace 2004 trailblazer radiator, replace speedometer needle on 2002 passat,

2002 Toyota 4 Runner Radiator Removal and Installation

0

Filed Under (Toyota) by admin on 13-07-2010

download
REMOVAL 1. DRAIN ENGINE COOLANT 2. REMOVE RADIATOR GRILLE Remove the 7 clips and radiator grille. 3. DISCONNECT UPPER RADIATOR HOSE 4. DISCONNECT RADIATOR RESERVOIR HOSE 5. DISCONNECT LOWER RADIATOR HOSE 6. REMOVE RADIATOR NO.2 FAN SHROUD 7. A/T: DISCONNECT OIL COOLER HOSES 8. REMOVE RADIATOR Remove the 4 bolts and the radiator. DISASSEMBLY 1. REMOVE NO.1 FAN SHROUD Remove the 4 bolts and No.1 fan shroud. 2. REMOVE RADIATOR SUPPORTS 3. REMOVE DRAIN PLUG ASSEMBLE SST SST 09230-01010 a. Install the claw to the overhaul handle, inserting it in the hole in part “A” as shown in the diagram. b. While gripping the handle, adjust the stopper bolt so that dimension “B” shown in the diagram is 0.2 – 0.3 mm (0.008 – 0.012 inch). NOTICE: If this adjustment is not done, the claw may be damaged. 5. UNCAULK LOCK PLATES Using SST to release the caulking, squeeze the handle until stopped by the stopper bolt. SST 09230-01010 6. REMOVE TANKS AND O-RINGS a. Lightly tap the radiator port (inlet or outlet) with a soft faced hammer, and remove the tank. b. Remove the O-ring. REASSEMBLY

2002 Ford Expedition Engine REMOVAL

0

Filed Under (Ford) by admin on 08-04-2011

download
Removal 1. Disconnect the hood lamp harness. 1. Remove the hood insulator retainers and position the insulator away from the hood. 2. Disconnect the hood lamp harness retainers. 3. Disconnect the hood lamp electrical connector. 2. NOTE: Mark the hinge-to-hood placement to ease alignment when reinstalling the hood. Remove the hood. 1. Disconnect the windshield washer hose. 2. Remove the ground strap bolt. 3. Disconnect the hood struts. 4. Remove the four hinge-to-hood bolts and remove the hood. 3. Recover the air conditioning (A/C) system. For additional information, refer to Section 412-00. 4. Remove the lower intake manifold (9424). For additional information, refer to Intake Manifold—Lower in this section. 5. Remove the front air deflector. 1. Remove the jack handle. 2. Remove the screws. 3. Remove the air deflector. 6. Remove the radiator upper hose from the radiator. 7. Using the special tools, remove the fan blade and fan clutch. 8. Remove the fan shroud. 1. Remove the screws. 2. Lift and remove the fan shroud and fan blade, as a unit, out of the vehicle. 9. NOTE: To avoid disturbing the transmission oil cooler fittings, use a backup wrench. Disconnect the transmission fluid cooler fittings. 1. Disconnect the upper transmission fluid cooler fitting. 2. Disconnect the lower transmission fluid cooler fitting. 10. Disconnect the lower radiator hose from the radiator. 1. Pry the locking tab up and out of the slot. 2. Rotate the lower radiator hose. 3. Disconnect the lower radiator hose. 11. Disconnect the degas hose from the radiator. 1. Release the clamp. 2. Slide the hose off of the radiator fitting. 12. Remove the radiator. 1. Remove the bolts. 2. Remove the upper radiator support brackets, the jack handle and the wheel nut wrench retainers. 3. Lift the radiator off the radiator mounting insulators. 4. Remove the radiator mounting insulators. 13. Remove the accessory drive belt. For additional information, refer to Section 303-05. 14. Disconnect the generator electrical connectors. 1. B+ 2. Stator 3. Voltage regulator 15. Remove the lower bracket bolts and the generator. 16. Disconnect the exhaust gas recirculation (EGR) tube from the exhaust manifold. 17. Disconnect the transmission wiring harness retainers from the right cylinder head and position the harness aside. 18. Remove the bolts retaining the transmission to the engine. 19. Disconnect the bulkhead connectors. 20. Remove the ground strap retaining bolt. 21. Disconnect the degas return hose.

2000 BMW Z3 Roadster Radiator: Service and Repair Removing/Installing Radiator

0

Filed Under (BMW) by admin on 05-09-2010

download
Only open sealing cover on expansion tank when engine has cooled down. Drain coolant, refer to Cooling System – Service and Repair – Procedures See: Service and Repair Remove fan cowl, refer to Fan Shroud – Service and Repair – Procedures See: Fan Shroud/Service and Repair Note: When removing the fan cowl, note the engine variant. Air conditioner Disconnect plug connection on temperature switch. Disconnect upper water hose. Disconnect lower water hose. 2000 BMW Z3 Roadster 2.5 (E36/7) L6-2494cc 2.5L DOHC (M52 TU) Disconnect expansion hose. Automatic transmission Remove transmission oil cooler lines, catch transmission oil as it escapes and dispose of correctly. Installation: Check transmission oil level and correct if necessary, refer to Transmission and Drivetrain. Check connection for leaks. Unfasten left and right radiator mounts by pressing detent down with screwdriver. Sectional view of radiator mount: 1. Screwdriver 2. Front trim 3. Retaining lug for radiator