Filed Under (volkswagen) by admin on 16-03-2011
download
Model(s): Touareg with Tire Pressure Monitoring System Condition Tire Pressure Monitoring System Warning Light is ON. Service Note: Before performing this Technical Bulletin see Technical Bulletin Group 44 Number 04-02. – Perform the following three steps in order. 1. Check and, if necessary, replace Tire Pressure Monitoring Control module prior to VIN: 4D018766. 2. Reassemble vehicle and follow “store tire pressure values” instructions 3. Diagnosis information listed in VESIS under ’additional information 1. Check and if necessary, replace Tire Pressure Monitoring Control module prior to VIN: 4D018766 – Switch ignition OFF. – Remove bolt -4- (2x). – Pry driver side footwell cover -5- out of mountings near clip -6- using wedge T10039/1. – Pull cover out of rear mountings. – Disconnect footwell light -3- from wiring harness. – Separate wiring harness -1- from diagnosis plug -2-. 2. Follow instructions in Owner’s Manual “Tire pressure monitoring system” to store tire pressure values If system learns and stores values and no warning lights are ON. z Work is complete. – If system does not learn and store values or warning lights are ON. – Continue with Step 3.
Filed Under (Uncategorized) by admin on 31-03-2010
download
Service Light Reset – Citroen Saxo (1999 on)
Using button located at the left hand side of speedometer:
? Switch the ignition off.
? Press and hold button
? Switch on the ignition.
? Keep the button depressed for 10 seconds.
? The “spanner” symbol will go out and the display read 0
Filed Under (Renault) by admin on 24-05-2010
download
The reset button is located on the bottom right hand side of the Rev counter on the instrument cluster. Switch ignition on. Press reset button until “spanner “ symbol flashes. Keep button depressed until “spanner” symbol stops flashing and remains illuminated. Indicator shows appropriate service interval. Release reset button. Switch ignition off. Some vehicles are fitted with a ‘SERV’ lamp, this is not a service interval indicator lamp. It is a malfunction indicator lamp (MIL).
Filed Under (Renault) by admin on 12-04-2010
download
The reset button is located under the speedometer on the instrument cluster. Switch ignition on.
? Switch ignition on. ? Press reset button until “spanner” symbol flashes. ? Keep button depressed until “spanner” symbol stops flashing and remains illuminated. ? Indicator shows appropriate service interval. ? Release reset button. ? Switch ignition off. Some Vehicles are fitted with a ‘SERV’ lamp, this is not a service interval indicator lamp. It is a malfunction indicator lamp (MIL)
Filed Under (volkswagen) by admin on 30-03-2010
Tags: automatic shift,
battery check,
battery voltage,
change engine oil,
check battery,
exhaust system,
maintenance intervals,
maintenance service,
manual transmission,
oil filter,
shift lock,
volkswagen touareg,
vw 505 01,
windshield washer fluid
download
Service Circular. 2005 Touareg Scheduled Maintenance Intervals. Date: July 1, 2004. Number: VMS Engine: Change engine oil and oil filter (Caution: for 6 and 8 cylinder engines use only oil fulfilling the VW 500 00, 501 01 or 502 00 specifications and for vehicles with 10 cylinder TDI engine use only oil fulfilling the VW 505 01 specifications with the viscosity 5W40) Engine: Check for leaks Exhaust system: Check for damage or leaks Battery: Check battery voltage (12.5v) (Recharge if necessary) Door check straps: Lubricate
Windshield washer fluid: Check level; add if necessary Fuel filter: Replace (TDI engine only) Dust & pollen filter: Replace (where
applicable) Automatic shift lock: Check operation including park/neutral/safety switch Automatic transmission: Check for leaks
Manual transmission: Check oil level; add if
