Auto Repair Manual Free Download and ReviewsFree download ebook pdf files automotive manual

download
Removal Removal 1. Raise and support front of vehicle. 2. Support engine. 3. Remove: RH front wheel. Inner wing panel. Engine mounting and bracket. Auxiliary drive belt(s). Cylinder head cover. Timing belt upper cover [1] . 4. Turn crankshaft clockwise to TDC on No.1 cylinder. Ensure crankshaft pulley timing mark aligned [2] . 5. Check hole in camshaft sprocket aligned with mark on camshaft bearing cap [3] . 6. If not: Turn crankshaft one turn clockwise. 7. Remove: Crankshaft pulley bolt [4] . Use tool Nos.09213-14010 & 09330-00021. Crankshaft pulley [5] . Use tool No.09213-31021. Timing belt lower cover [6] . 8. Temporarily fit crankshaft pulley bolt [4] . 9. Ensure timing marks aligned [3] & [7] . 10. Slacken tensioner bolt [8] . Move tensioner away from belt and lightly tighten bolt. 11. Remove: Timing belt. Tensioner pulley and spring [9] & [10] .

download
1. Loosen the water pump pulley set bolts.2. Remove the drive belt adjusting bolt, and remove the drive 3. Remove the water pump pulley from the water pump.4. Remove the crankshaft pulley set bolt.5. Using SST (09213-31021), remove the crankshaft pulley.Remove the timing chain cover bolts and nuts as shown in the figure.Using a plastic faced hammer, loosen the timing chain cover and remove it.Remove timing chain tensioner and vibration damper. Remove the camshaft sprocket set bolt.