Toyota Previa & Estima
1990 TO 2000
Service and Repair Manual on CD
This, Toyota Previa/Estime, service and repair manual, covers all aspects of maintaining and repairing your vehicle which is NOT contained in the user manual
This manual covers BOTH the UK and Japanese model
Estima Lucida 2.2 diesel and 2.4 petrol
Estima Emina 2.2 diesel and 2.4 petrol
Previa 2.2 diesel and 2.4 petrol
It covers the 3C-T and 3C-TE diesel engines, and the 2.4 petrol engine.
To include: Maintenance of the manual and automatic gearboxes

repair and service manual for toyota celice 2000 – 2006
everything you need to know
covers all mechanical and electrical aspects
we also have manuals for other toyota cars, see our other listings

INTRODUCTION
Before Using Your Solo:
Be sure to pay special attention to torque settings.
Standard Torque Values
0.118 in. (3 mm) Thread-Diameter Philips Screw
0.7 lb ft (1 N m)
0.197 in. (5 mm) Thread-Diameter Philips Screw
3.6 lb ft (5 N m)
1.  Read the owner’s manual before starting or using your Screed unit.
2.  Remove Solo unit from box.
3.  Take note of loose parts:  oil  fasteners
4.  Add Oil:  Set Solo unit on a flat surface; Use the kickstand to support the unit.
Adding Oil to the Crankcase – Initial Use:  Your SOLO unit is shipped “dry” for safety
purposes.  Prior to starting your Honda engine, you must add oil to the crankcase.  Using the
proper type and weight of oil in the crankcase is extremely important.  Check the oil before
each use and change the oil regularly.  Failure to use the correct oil, or using dirty oil, can
cause premature engine wear and failure.  See the GX31 owner’s manual for more
information.

download

Toyota Hilux Surf 2.5 & 2.8 engine manual
This Toyota engine workshop manual will cover the 2.5 and 2.8 diesel engines fitted in the import Hilux Surfs.
For models LJ70, 72, 73, 77, 79series LN106, 111,130, 135series
This engine manual has been prepared to provide information covering general service repairs for the 2L-T and 3L engines mounted on the Toyota Land Cruiser, Hilux and 4Runner. Covering the following
* Introduction
* Engine Mechanical
* Turbocharger System
* Fuel System
* Cooling System
* Lubrication System
* Starting System
* Charging System
* Service Specifications, standard bolt torque spec, Special service materials & Special service tools.
In PDF format and 100′s of pages in total and includes the second generation Hilux owners manual.
A ideal companion to have with your Hilux, especially if you are having the dreaded overheating problems and cracked head associated with the 2.5 turbo

download
1. Unscrew the shift knob and remove the boot. 2. Remove cover which houses the lighter assembly. There are four clips holding it to the center console, they just pop out. 3. Unplug the lighter assembly. Below you can see the cover off and the four clips which hold it to the center console. 4. Remove the two screws holding the power window controls (if applicable). Next unplug the locks to remove the assembly. 5. Remove the rubber mat, and the two bolts in the storage compartment of the center console. 6. Remove the two screws on either side of the center console. 7. Unscrew the 2 screws at the front of the center console. After the bolts and the screws have been removed the entire console will be free and can be taken out 8. Carefully slide an exacto knife under the clip on the right side of the assembly to remove it. CAUTION : Be extremely careful in this step, if the knife is torqued too hard the blade could break and become a dangerous projectile. 9. Insert a flat head screw driver into the gap created by the exacto knife to pry the clip off.